RPONPM-600 - PON Optical Power Meter for ONU and OLT measuring with internal storage memory and USB connectivity

(No reviews yet) Write a Review
SKU:
RPONPM-600
UPC:
811704017467
Condition:
New
  • RPONPM-600 - PON Optical Power Meter for ONU and OLT measuring with internal storage memory and USB connectivity - front view
  • RPONPM-600 - PON Optical Power Meter for ONU and OLT measuring with internal storage memory and USB connectivity - side view with USB connector
  • RPONPM-600 - PON Optical Power Meter for ONU and OLT measuring with internal storage memory and USB connectivity - top optical connectors
  • RPONPM-600 - PON Optical Power Meter for ONU and OLT measuring with internal storage memory and USB connectivity - rear battery panel view
  • RPONPM-600 - PON Optical Power Meter for ONU and OLT measuring with internal storage memory and USB connectivity - pouch view
  • USB cable included in package of RPONPM-600 PON Optical Power Meter
  • Carton box package for RPONPM-600 PON Optical Power Meter
MSRP: $799.00
$390.00
— You save $409.00

Description

The RPONPM-600 PON Optical Power Meter is the perfect tool for a PON network manager. For a PON fiber Plant Manager, this is an indispensable tool, allowing management and data storage for up to 1000 measurements. Optical Power Meters help identifying connectivity issues and determine potential under or over budgeting of the optical power available. RPONPM-600  has a color TFT display and features an USB interface that allows 24/7 measuring with a help of a PC. When used in standalone mode it stores up to 1000 traces in its own internal memory. The PON Optical Power Meter can measure both OLT and ONU devices using different photodiodes.

RPONPM-600 can measure 1310/1490/1550nm fiber light. It can measure light levels between +7dBm and -70dBm with an accuracy of +/- 0.2dBm. Measurement resolution is 0.1dBm.

RPONPM-600 has an orange rubber protective case and package includes an USB to PC connectivity cable. Three AA batteries are required to operate the power meter, batteries are NOT included.

The RPONPM-600 is one of the best available PON Optical Power Meters on the market, using highest quality photodiodes and allowing user to custom define up to 10 measuring wavelengths. It is a purchase that allows measuring of active fibers efficiently, being an asset for any fiber professional user.

Features

  • Dedicated PON Optical Power Meter
  • Supports online continuous measurements
  • Supports pass-through measurements
  • 10 sets of user defined wavelengths
  • Threshold level reading setting (easy reading display for Pass/Fail)
  • USB connection for PC data retrieval and 24/7 real-time test run on PC
  • 1000 traces of measurement data storage in internal memory

Technical Specifications

Model   RPONPM-600
Display Range 1310/1490/1550nm: +7 ~ -70dBm
Accuracy +/- 0.2 dB (at 20 deg. Celsius)
Passthrough IL < 1.5 dB
Resolution 0.01 dB 
Optical Connector SC/UPC
Automatic Power Off Idle for 10 minutes or at Low battery warning
Data Capacity 1000 traces 
Threshold Setting 10 custom levels - easy readable Pass/Fail results
Custom Wavelengths 10 user defined 
Data Interface USB 2.0
Real Time Monitoring Internal 1 Min / 0.5s interval, 24/7 with connected PC
Battery Life AA x 3, 36+ hours of operation (batteries NOT included)
Power supply AA x 3 or USB cable 5V, 500mA
Size 170mm * 97mm * 38mm 
Weight 380g without batteries
Storage Temperature -20~+60 Celsius, humidity<90% non-condensing
Operating Temperature   -10~+50 Celsius, humidity<90% non-condensing 
Warranty 2 years

 

Additional information on the RPONPM-600 Optical Power Meter: PDF Datasheet

 

View AllClose

Warranty Information

2 years Product is guaranteed free of manufacturer defects. If any fault caused by manufacturing process is found, product is replaced under warranty. Faults of manufacturing do not include misuse or normal wear and tear of the product.
View AllClose

0 Reviews

View AllClose