FRM220-10GC-TS - 10G Ethernet RJ45 copper to SFP+ slot media converter managed

(No reviews yet) Write a Review
SKU:
FRM220-10GC-TS
UPC:
FRM220-10GC-TS
MSRP: $2,250.00
$655.00
— You save $1,595.00

Description

Note: The FRM220-10GC-TS converter INCLUDES a 2 slot FRM220-CH02M-AC casing. The case does include a local serial RS-232 DB9 console port for standalone management and AC 90-240V embedded power supply.

Product description

The FRM220-10GC-TS converter is an extremely versatile fiber media converter equipped with one 10G-Base-T Ethernet copper port (RJ45 Cat6a or Cat 7 twisted pair cabling, backwards compatible with 1000Base-T Gigabit Ethernet and 100Base-TX Fast Ethernet copper ports) and one 10G-Base-R SFP+ slot for 10G fiber Ethernet uplink. Any 10GBase transceiver (multi-mode or single-mode) or DWDM/CWDM SFP+ module can be installed in the SFP+ slot of FRM220-10G-TS converter. Also copper direct attach cables (DAC's) are supported by the FRM220-10GC-TS transponder. Unit supports web-based, in-band management telnet, SNMP or console management when installed in the FRM220-CH20 chassis or in the small standalone casing of FRM220-CH02M that provides a separate console port. The media converter supports copper Ethernet 10G data (10G-Base-T and 10G-Base-R standards) as well as Gigabit Ethernet and Fast Ethernet RJ45 UTP connections.

The FRM220-10GC-TS 10G converter is extremely versatile. You can have the converter card installed in the small FRM220-CH02M casing with choice of AC, DC(-48V) or AC+DC power supply or on the 8 or 20 slot FRM220 chassis with 2U and 19" rack mountable size, in matter of minutes. The FRM220-10GC-TS 10G rate copper to fiber media converter is one of the best choices for data carriers and service providers.

Technical specifications
Interfaces: One SFP+ slot supporting 10G Ethernet data rate 10G-Base-R and one RJ45 10G-Base-T (Cat6a/Cat7) twisted pair cable port. UTP RJ45 port supports Gigabit 100Base-T and Fast Ethernet 100Base-TX connections
Connectors: SFP+ slot with LC optical connectors, supporting SR, LR, ER, ZR, CWDM or DWDM optics as well as DAC copper and optical cables and RJ45 copper port
Front LEDs: PWR,Line Link, Client Link, Test, Loopback, Alarm,  Active port
Power: Internal 90-260V AC power supply with NEMA1-15(2 blades only), US type main plug or DC -48V with IEC 3 screw block connector 
Temperature: 0~50°C (Operating); 0~70°C (Storage)
Humidity: 10~90% non-condensing
Consumption: less than 10W
Dimensions(WxDxH): 155mm x 88mm x 23mm without power casing
Weight: 150g (card only)
Compliance: CE, FCC, LVD, RoHS
MTBF: 65,000 hours

Additional information on FRM220-10GC-TS converter: PDF Datasheet; PDF Installation Manual.

Note:
To populate the 10G Ethernet media converter with optical modules, please visit the SFP+ transceiver module page. For DAC cables please visit the 10G Direct Attach Cable page. For any questions please do not hesitate to contact our sales department by e-mail or telephone.

View AllClose

Additional Information

Interface Type:
10G
Management:
web-managed
Management:
SNMP
Management:
local console
Transceiver Format:
SFP
Power Type:
AC 90-240V embedded PSU
Connectors:
RJ45 (Ethernet)
Connectors:
DB9
Connectors:
SFP slot
Features:
9K Jumbo frame support
Features:
wall mountable
View AllClose

0 Reviews

View AllClose