FMC-1001S-WA20 Gigabit Ethernet WDM single strand SMF fiber media converter, BiDi T:1310/R:1550nm, 20Km

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
  • FMC-1001S-WA20 Gigabit Ethernet WDM single strand SMF fiber media converter, BiDi T:1310/R:1550nm, 20Km
  • FMC-1001S-WA20 Gigabit Ethernet WDM single strand SMF fiber media converter back panel with threaded holes for wall mounting bracket
  • FMC-1001S-WA20 Gigabit Ethernet WDM single strand SMF fiber media converter rear DC 12V power jack plug
MSRP: $199.00
— You save $115.00


* Note: This product is a bundle between the FMC-1001S converter and an SFP-7020-WA SFP transceiver. AC 90-240V power adapter is included in carton package.

Product description

FMC-1001S-WA20 converter is an economical yet high performance un-managed Gigabit Ethernet fiber media converter. The FMC series of media converters are noticed for their simplicity: no management features, guaranteed reliability and extremely affordable cost. FMC-1001S-WA20 Gigabit converter is a bundle between and FMC-1001S converter and a BiDirectional SFP 1.25G with Tx:1310nm and Rx:1550nm. The unit has one RJ-45 copper port with auto-negotiation 10/100/1000 and MDI/MDI-X features for the Gigabit Ethernet copper interface. Converter has DIP sw settings available for LFP function, speed and flow control on each port for maximum flexibility and fine tuning of the fiber or copper link connection. LED indicators signal the power status of the converter, UTP port speed, Link, and duplex status, FX port Link and duplex status. The FMC-1001S-WA20 must be matched to the FMC-1001S-WB20 model to operate properly.

Used with their compatible FMC-CH17-AC fiber optic chassis they can be aggregated up to 17 units in a 19" wide and 2U height space only.  This allows network operators higher density at a very affordable cost.

Technical specifications

Copper interface: RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX compliant and IEEE 802.3ab 1000Base-T compliant
Optical interface: 1000BaseX BiDi, T:1310/R:1550nm, 20Km, single LC connector
Ethernet interface: Supports 10/100/1000Base-T/TX, Full, Half duplex n-way (Auto-Negotiation). Supports Full, Half duplex, 10/100/1000 speed manual selection. Transmission Packet Rate for 10/100/1000Base-T/TX : 14880 per second /148800/1488000 per second. Copper TP cable 4 pair Cat. 5, 5e or 6 UTP
Features: Q-inQ pass through, VLAN 802.1q pass through, max. packet size 9K
Fiber operating distance: 20Km on single strand of 9/125um fiber
Optical connector: single LC connector
Front LEDs: PWR, Fiber Link, TP Link, TP Speed
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
AC 90-240V power adapter is included in carton package
Temperature: 0~50°C (Operating); 0~70°C (Storage)
Humidity: 20 80% non condensing (Operating); 0 90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 73mm x 108mm x 23mm
Weight: 160g (without AC adapter)
Compliance: FCC part 15, Subpart B, Class A, ANSI C63.4:2003 CE EN55022:2006, Class A EN55024:1998+A1:2001+A2:2003 LVD: EN 60 950-1:2001
MTBF: 65,000 hours

Fiber power budget according to available models
(highlighted model is one available for purchase on this page)

Model Distance Lambda Min. Output (dBm) Sensitivity (dBm) Power Budget (dB)
FMC-1001S-WA20 20Km Tx:1310nm
-8 -23 15
FMC-1001S-WB20 20Km Tx:1550nm
-8 -23 15

  Additional information on FMC-1001S-WA20 converter: PDF Datasheet; PDF Installation Manual.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
Gigabit Ethernet
Fiber Type:
single strand single-mode
Transceiver Format:
Tx Distance:
Power Type:
separate AC adapter included
RJ45 (Ethernet)
Cable Type:
Cable Type:
9/125um single-mode
9K Jumbo frame support
LFP Link Fault Pass through
wall mountable
DIP sw settings
View AllClose

0 Reviews

View AllClose