LFC-100-SC020 Fast Ethernet to 100Base-FX, SC, 20Km, 1310nm singlemode fiber media converter, LFP and DIP sw settings

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
  • LFC-100-SC020 Fast Ethernet singlemode fiber media converter front panel
  • LFC-100-SC020 Fast Ethernet SM fiber media converter with DIP sw settings
  • LFC-100-SC020 Fast Ethernet singlemode fiber media converter with DIP sw settings
  • LFC-100-SC020 Fast Ethernet SM fiber media converter with DIP sw settings bottom view
  • LFC-100-SC020 Fast Ethernet singlemode fiber media converter side view
  • LFC-100-SC020 Fast Ethernet fiber media converter rear view with DC power jack
  • AC adapter for LFC series media converters (US plug)

Quantity Discount

Product price $43.50
Buy 10 or above $41.33
MSRP: $79.00
— You save $35.50


* Note: AC 90-240V power adapter is included in carton package.

Product description

LFC series are newest series of media converters. The LFC-100-SC020 is a 10/100Base-Tx to 100Base-FX singlemode fiber, SC connector, 1310nm, 20Km reach optical port un-managed Fast Ethernet media converter. The RJ-45 copper port has auto-negotiation 10/100 and MDI/MDI-X features and DIP switch settings available for LFP function, converter-switch mode and speed and flow controls. LED indicators signal the power status of the converter, UTP port speed, UTP Link and FX port Link. Used with their compatible LFC-CH12 fiber optic chassis they can be aggregated up to 12 units in a 19" wide and only 1RU of height space only. This is the highest density attainable for unmanaged fiber media converters.

The LFC-100-SC020 Fast Ethernet converter is a cost effective fiber media converter. It also offers the optional wall mounting solution for individual converters named LFC-WMK.


  • 10/100Base-Tx to 100Base-FX media converter
  • Auto-Negotiation
  • Auto MDI/MDIX
  • Forward 2048 bytes (Max.) packets in switch mode
  • Forward 9k bytes in converter mode (fiber & copper port at the same speed, transparent)
  • Provides DIP switch to set function
    • Select UTP speed (10/100M)
    • Select LPF enable / disable
    • Converter mode enable / disable
    • Select Half/Full Duplex flow
  • Supports Q in Q double tagged frame transparent
  • Supports IEEE 802.1Q Tag VLAN pass thru
  • Aggregates into LFC-CH12 series chassis available with various power supplies

Technical specifications

Copper interface: RJ45 copper IEEE 802.3 10Base-T and 802.3u 100Base-TX compliant
Optical interface: 100Base-FX, SMF, SC duplex, 1310nm, 20Km reach
Ethernet interface: Supports 10/100BaseTX, Full, Half duplex n-way (Auto-Negotiation). Supports Full, Half duplex, 10/100 speed manual selection. Transmission Packet Rate for 10/100Base-TX : 14880 per second /148800 per second. Copper TP cable 4 pair Cat. 5, 5e UTP
Optical connector: SC duplex connector
Front LEDs: PWR, Fiber Link, TP Link, Speed
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
AC 90-240V power adapter is included in carton package
Temperature: 0~50°C (Operating); -30~70°C (Storage)
Humidity: 10-85% non condensing (Operating); 0-90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 60mm x 90mm x 20mm
Weight: 180g (without AC adapter)
Compliance: FCC part 15, Subpart B, Class A, ANSI C63.4:2003 CE EN55022:2006, Class A EN55024:1998+A1:2001+A2:2003 LVD: EN 60 950-1:2001
MTBF: 65,000 hours

Additional information on LFC-100-SC020 converter:
PDF Datasheet; PDF Installation Manual.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
Transceiver Format:
1x9 fixed
Power Type:
separate AC adapter included
RJ45 (Ethernet)
9K Jumbo frame support
LFP Link Fault Pass through
wall mountable
DIP sw settings
View AllClose

0 Reviews

View AllClose