FRM220-DS3-E3-CH01MAC - coax E3 / DS3 over fiber (SFP slot)media converter w/ console mgmt and embedded AC PS

(No reviews yet) Write a Review
SKU:
FRM220-DS3-E3-CH01MAC
UPC:
FRM220-DS3-E3-CH01MAC
MSRP: $795.00
$595.00
— You save $200.00

Description

Product description
The FRM220-DS3-E3 is an extremely versatile E3 and DS3 over fiber media converter. Any 155Mbps rate optical SFP transceiver can be installed into the single SFP slot of the media converter, offering maximum flexibility for the optical interface. FRM220-DS3-E3 can support operation on E3 75Ohms or DS3 75Ohms dual BNC coaxial copper interface. The FRM220-DS3-E3 can extend transparently over fiber any E3/DS3 signal. Unit supports local console, and future releases will include web-based and in-band management. The web and In-band features will be available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-DS3-E3 can accommodate any type of miniGBIC (SFP) 155Mbps rate optical modules, either multi-mode, singlemode or single strand Bi-Directional type.

The FRM220-DS3-E3 E3 or DS3 fiber extender is extremely versatile, being available in several versions of power supply: embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220 chassis, in matter of minutes.

Technical specifications
Interfaces: dual 75Ohms BNC copper for E3/DS3 interface and SFP slot for 155Mbps fiber rate communication
Connectors: dual BNC copper and SFP slot 155Mbps
Standards: ANSI, ITU-TS, ETSI, AT&T, G.703, G.921 & G.955
Optical slot: Small Form Pluggable - supports Auto and Forced mode operation
Front LEDs: PWR, Coax link, coax loop-back, AIS on coax
link, FX link, fiber loop-back, AIS on FX link
Power: Embedded 90-260V AC switching power supply with IEC C14 connector and US type main plug power cord
Temperature: 0-60°C (Operating); 0-70°C (Storage)
Humidity: 20 80% non condensing (Operating); 0 90% (Storage)
Consumption: less than 5W
Dimensions(WxDxH): 88mm x 155mm x 23mm
Weight: 950g (without power cord)
Compliance: CE, FCC Class A, LVD, RoHS
MTBF: 65,000 hours

Additional information on FRM220-DS3-E3 converter: PDF Datasheet; PDF brief installation guide;   PDF Manual.

Note:
To have a complete E3 / DS3 over fiber media converter, you must also order an 155Mbps rate SFP transceiver module together with the FRM220-DS3-E3 converter. Please visit the 155Mbps SFP transceiver module page or contact our sales department by e-mail or telephone.

View AllClose

Additional Information

UPC:
811704013247
Interface Type:
DS3
Management:
local console
Transceiver Format:
SFP
Power Type:
AC 90-240V embedded PSU
Connectors:
BNC
Connectors:
DB9
Connectors:
SFP slot
View AllClose

0 Reviews

View AllClose