FRM220-4G-3S SFP to SFP media converter (repeater) up to 4Gbps rate with optical protection, managed

(No reviews yet) Write a Review
SKU:
FRM220-4G-3S
UPC:
811704015531
Availability:
Not a stock item, ships in 21 days from order date
MSRP: $459.00
$389.00
— You save $70.00

Description

Product description
The FRM220-4G-3S media converter has the ability to convert any signaling rate, from 155Mbps to 4.25Gbps, being an Universal Fiber Converter - ideal for any communication standard like: Fast and Giga Ethernet, STM-1, STM-4, STM-16, OC-1, OC-3, OC-12 and OC-48, FDDI or Fibre Channel 1/2/4G. FRM220-4G-3S has management features via SNMP or local console port (telnet) and offers active secondary optical path protection circuitry for optical redundancy. For local console the model must be purchased with a separate casing that offers serial console port, like the FRM220-CH01M or the FRM220-CH02M.

The FRM220-4G-3S is a 2R 4G optical regeneration device, which consists of Re-amplification and Re-shaping. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching is supported for the aggregate fiber ports. When the FRM220-4G-3S card is placed in the FRM220 rack with SNMP management, the management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port and perform diagnostic loop backs.

FRM220-4G-3S converter cand be used as card into the larger 20 slot FRM220-CH20 or 8 slot FRM220-CH08 chassis.

Features

  • Multiple protocol supported at bit rates 28Mbps to 4.25Gbps (Fast Ethernet, Gigabit Ethernet, OC -3, OC -6, OC -12, STM-1, STM-4, STM-16, FC -1, FC -2, FC -4)
  • Network management via Web, Telnet, SNMP in central FRM220 chassis
  • Local configuration via DB9 console port (when placed in CH01M or CH02M)
  • Digital diagnostic monitoring of SFP module
  • Perform optical repeater function (Re-amplification, Re-shaping)
  • Facility loopback on both Client / Line sides
  • 1+1 optic fiber protection
  • Link Fault Pass-Through (LFPT)
  • Auto Laser Shutdown (ALS)
  • Detect transceiver transmitter error alarm

Technical specifications

Interfaces: three SFP slots supporting multi-rate up to 4.25Gbps
Connectors: three SFP(Small Form Pluggable) slots for optical modules
SFP slot: multi-rate OC1, OC3, OC12, OC48, STM-1, STM-4, STM-16 FDDI, Fibre Channel 1/2/4G, Fast and Gigabit Ethernet rates supported
Functions: 2R, reshape and re-amplify, SFP 2 copies the SFP 1 slot rate; it is mandatory that SFP modules run at same rate, third optical SFP provides redundant path
Front LEDs: PWR, Line Link, Client Link, Test, Loop back, Port
Active, Alarm
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0 - 50°C (Operating); -20 ~ 70°C (Storage)
Humidity: 20 80% non condensing (Operating); 0 90% (Storage)
Consumption: less than 12W (depending on SFPs)
Dimensions(WxDxH): 88mm x 155mm x 23mm
Weight: 340g (without AC adapter)
Compliance: CE, FCC part 15 Class A
MTBF: 65,000 hours



Additional information on FRM220-4G-3S: PDF Datasheet; PDF Installation Manual.

Note: For SFP transceivers please go to the SFP section of optical modules were a good selection of CWDM/DWDM, BiDi and SM/MM modules are available for transponder applications.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
OC3
Interface Type:
OC12
Interface Type:
Gigabit Ethernet
Interface Type:
2.5G
Interface Type:
OC48
Interface Type:
4G
Management:
web-managed
Management:
SNMP
Transceiver Format:
SFP
Power Type:
no AC adapter included
Connectors:
SFP slot
View AllClose

0 Reviews

View AllClose

Related Products