Search
Browse Categories
 

POE-01-DIN - Full 8 pin Cat6 RJ45 Ethernet surge protector with PoE support and DIN rail mount system

<< Previous Next >>
MSRP: $49.00
Price: $37.00
In stock. 229 units available for immediate delivery.
Manufacturer: ROBOfiber
Manufacturer Part No: POE-01-DIN
Connectors: RJ45 (Ethernet)
Ships same day for orders placed before 3:30PM PST
free shipping
value placeholder
POE-01-DIN
POE-01-DINPOE-01-DINPOE-01-DINPOE-01-DIN

Quantity Discounts

QuantityAmount
10 to 19$35.15
20 or more$33.30
POE-01-DIN is an in-line RJ45 Ethernet Cat6 cable surge protector that can be attached to a DIN rail system. It installs simply on a Cat5, Cat 5e or Cat6 4 twisted pair cable. Device is using special diodes and gas discharge modules for effective lightning protection. It protects any RJ45 Ethernet based device like switches, DSL modems, routers, computers, etc. while allowing PoE 802.3af/at powered cables to pass through the PoE power to remote cameras or WiFi/VoIP equipment. The PoE feature allows protection of the expensive CO equipment against lightning and other industrial power surges. When installed on a DIN rail, 17 such protectors can be put side by side in a 19" wide DIN rail mounted on a rack (See second photo). For 35mm DIN rails, please check the related items for mounting protectors on a rack including the DINRAIL-19.

Earthing bars for 5 and 10 units are sold separately. These bars connect the grounding of all DIN rail installed protectors and then provide a single point for grounding to the electrical ground. Such connection is crucial for the efficiency of the protectors and the copper bars are best conductors for grounding. For copper earthing bars DIN-GBAR-5 and DIN-GBAR-10, please also check the related items.

The 8 pin surge protector is also good for RJ48c 100ohm T1 interfaces, providing effective surge protection on all 8 pin connectors from the T1 copper interface.

Note
: This special surge protector version does SUPPORT the IEEE 802.3af PoE standard (Power over Ethernet). You can use such protector on PoE active cabling. The compatibility is assured with the IEEE 802.3af/at standard by supporting a much higher clamping voltage of 57V.

Features of POE-01-DIN RJ45 Ethernet and T1 surge protector
Fast energy absorption on over-voltage
Low resistance and minimal capacitance - minimal influence on data link
Easy in-line installation: two RJ45 female connectors

Technical specifications
Discharge current max.: 5KA
Discharge current nominal: 0.5KA
Max. voltage: 57V PoE (all pins)
Response time: line-line<1ns, line-ground<100ns
Insertion loss: <2.0dB (250MHz)
Capacity: <= 165pF (line-to-line)
Dimensions: 106.2mm x 37.6mm x 25.6mm
Weight: 75g

Additional information on POE-01-DIN: PDF Datasheet

Related Products

POE-01-WRG
POE-01-WRG - Full 8 pin Cat6 RJ45 Ethernet surge protector with PoE IEEE 802.3af support
MSRP: $49.00
Price: $37.00
POE-01-WRG - Full 8 pin Cat6 RJ45 Ethernet surge protector with PoE IEEE 802.3af support
POE-01-WRG is an in-line RJ45 Ethernet Cat6 cable surge protector PoE compatible. It installs simply on a Cat5/5e/6 4 twisted pair cable using special diodes and gas discharge modules for effective lightning protection. Model is compatible with PoE ports.
free shipping
DINRAIL-19
DINRAIL-19 - metal DIN RAIL, 19" long, EN50022/TS35 compatible 35x7.5mm section for POE-01-DIN group installation
MSRP: $15.99
Price: $12.75
DINRAIL-19 - metal DIN RAIL, 19" long, EN50022/TS35 compatible 35x7.5mm section for POE-01-DIN group installation
This is a 19" long EN50022 compliant DIN rail, 35x7.5mm "hat type" (also know as TS35), suitable for wall or rack installation and useful for POE-01-DIN or other Industrial switches installation.
free shipping
DIN-GBAR-5
DIN-GBAR-5 - all copper grouding/earthing busbar for up to 5 POE-01-DIN protectors common ground connectivity
MSRP: $6.99
Price: $4.95
DIN-GBAR-5 - all copper grouding/earthing busbar for up to 5 POE-01-DIN protectors common ground connectivity
This is an all copper grounding bar with 5 indentations, suitable for up to 5 POE-01-DIN units common grounding/earthing. The bar runs behind the surge protectors and not touching the DIN rail.
free shipping
DIN-GBAR-10
DIN-GBAR-10 - all copper grouding/earthing busbar for up to 10 POE-01-DIN protectors common ground connectivity
MSRP: $7.99
Price: $5.95
DIN-GBAR-10 - all copper grouding/earthing busbar for up to 10 POE-01-DIN protectors common ground connectivity
This is an all copper grounding bar with 10 indentations, suitable for up to 10 POE-01-DIN units common grounding/earthing. The bar runs behind the surge protectors and not touching the DIN rail.
free shipping
SP-SE-R08-8
SP-SE-R08-8 Ethernet 8 ports full 8 pin Cat6 RJ45 surge protector
MSRP: $270.00
Price: $220.00
SP-SE-R08-8 Ethernet 8 ports full 8 pin Cat6 RJ45 surge protector
SP-SE-R08-8 is an 8 port in-line RJ45 Ethernet Cat6 cable surge protector. It installs simply on a Cat5, Cat 5e or Cat6 4 twisted pair cable. Device is using special diodes and gas discharge modules for effective lightning protection.
free shipping
SP-POE-24
SP-POE-24 24 port full 8 pin Cat6 RJ45 Ethernet surge protector with PoE IEEE 802.3af support
MSRP: $889.00
Price: $680.00
SP-POE-24 24 port full 8 pin Cat6 RJ45 Ethernet surge protector with PoE IEEE 802.3af support
SP-POE-24 is a 24 port in-line RJ45 Ethernet Cat6 cable surge protector with PoE support. It installs simply on a Cat5, Cat 5e or Cat6 4 twisted pair cable. Device is using special diodes and gas discharge modules for effective lightning protection.
free shipping

Product Reviews

(0 Ratings, 0 Reviews)