RB10-F2404M3-AC - 10G all fiber 24 SFP+ ports, 4x 100G QSFP28 ports Layer 3 managed routing switch, rack 19"

(No reviews yet) Write a Review
SKU:
RB10-F2404M3-AC
UPC:
811704017542
Availability:
Ships same day for orders placed before 3:30PM PST
  • RB10-F2404M3-AC - 10G all fiber 24 SFP+ ports, 4x 100G QSFP28 ports Layer 3 managed routing switch, rack 19" front view
  • RB10-F2404M3-AC - 10G all fiber 24 SFP+ ports, 4x 100G QSFP28 ports Layer 3 managed routing switch, rack 19" side view
  • RB10-F2404M3-AC - 10G all fiber 24 SFP+ ports, 4x 100G QSFP28 ports Layer 3 managed routing switch, rack 19" rear view
MSRP: $4,995.00
$3,299.00
— You save $1,696.00

Description

Product description
RB10-F2404M3-AC Layer 3 switch design is 1RU/19” wide box with 24x 10G/1G Base SFP+ slots and 4x 100G/40G QSFP28/QSFP+ ports, powered by a high-performance ASIC switch chip, supporting 32K MAC addresses and 28K routing items and offering redundant power input (two AC power supplies are supplied by default for power redundancy being optional). Switch Supports Virtual Cluster Switching Technique: the logic control plane, service control plane and service data plane are separated and therefore device can support continuous Layer3 routing forwarding, avoiding service interruption as a result of a single point of failure.

Switch supports multiple services like IPv6, MPLS, VPN and network security based on L2/L3/L4 wire-speed switching service. It supports hot firmware upgrade, continuous forwarding, soft restarting and redundancy protection.

Features

VLAN: 4K Active VLAN, QinQ & Selective QinQ, GVRP, Private VLAN, Voice VLAN
Spanning Tree: 802.1D (STP) 802.1W (RSTP) and 802.1S (MSTP) BPDU guard, root guard and loopback guard
Multicast: IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave, MVR, IGMP filter, PIM-SM and PIM-DM
MAC Switching: Static Configuration and Dynamically Learning of MAC Address, Check and Delete MAC Address, MAC Address Aging Time, Limit on MAC Address Learning Number, MAC Address Filtering Function, Black-Hole MAC Items
IPv4: Static Routing, RIP V1/V2, OSPF and BGP, Policy Routing, Load Balance through Equal-Cost Routing, BFD for OSPF and BGP
IPv6: ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet , IPv6 neighbor discovery, Path MTU discovery ,MLD v1/2, MLD snooping , IPv6 static routing, RIPng, OSPFv3 and BGP4+, Manual Tunnel, ISATAP Tunnel and 6-To-4 Tunnel
Accessories: Power cord, rackmount kits, console cable
QoS: CAR, HQoS, MAC/IP/TCP/UDP/ VLAN/ COS/ DSCP/ TOS based QoS, 802.1P/ DSCP priority re- labeling, SP, WRR and “SP+WRR”, Tail-Drop, WRED, flow monitoring and traffic shaping
Security: Port isolation, Port security, and “IP+MAC+port” binding, MAC sticky DHCP Snooping and option 82, DAI & IP source guard, PPPoE+, IEEE 802.1x, Radius and BDTacacs+ L2/L3/L4 ACL flow identification and
filtration, Anti-attack from DDoS, TCP’s SYN Flood, UDP Flood, etc. Broadcast/multicast/unknown unicast storm-control MD5, SHA-256, RSA-1024, AES256, etc.
Reliability: Static/LACP link aggregation, ISSU uninterrupted system upgrade; Protection Including EAPS and ERPS, VRRP/HSRP, Ethernet OAM 802.3ah/802.1ag/ITU-Y.1731, GR for OSPE and BGP, BFD for OSPF and BGP
Management: Console, Telnet, SSH v1/2, HTTP, HTTPS SNMP v1/v2/v3, RMON TFTP, FTP, SFTP NTP ZTP (Zero Touch Provisioning), SPAN, RSPAN
Environment: Operating temperature/humidity: 0°C -50°C ,10%-90% non-condensing
Storage temperature/humidity: -20°C -70°C , 5%-95% non-condensing
Certification: CE, FCC, ROHS

Specifications

 PART No.  RB10-F2404M3-AC
 Interface  24× 1000/10GBase SFP+ ports, 4×100G/40G QSFP28/QSFP+ ports
 Console  1× RJ-45, 1 x USB and 1x RS-232 (CLI) (serial RS-232 DB9 cable included)
 Backplane  800 Gbps
 Forwarding Rate  600 Mpps
 Total output BTU (1000BTU/H=293W)   238.91
 Fan Number  4
 Noise@25°C(dBA)   57
 MTBF (h)  > 50,000
 Forwarding Mode  Store-and-Forward
 Flash (MB)  32
 DRAM (MB)  1024
 MAC Address Table Size  16K for IPv4; 12K for IPv6
 Jumbo Frame Size  9K
 Total SVI  1K
 Power Supply  AC:100V-240V,50/60Hz ±10% 100W, removable and redundant (two PS inserted by default)
 Power Consumption  
 Full load  < 75W
 Chassis  
 Dimensions (WxDxH) (mm)  442 x 350 x 44
 Weight (Kg) (unpopulated)  7.1

 

Additional information on RB10-F2404M3-AC switch: PDF Datasheet

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

UPC:
811704017542
Interface Type:
100G
Interface Type:
10G
Management:
web-managed
Management:
SNMP
Management:
local console
Management:
telnet
Power Type:
AC 90-240V embedded PSU
Connectors:
RJ45 (Ethernet)
Connectors:
DB9
Connectors:
SFP slot
Type:
Layer 3
Features:
RSTP
Features:
MSTP
Features:
802.3ad LACP
Features:
IGMP snooping
Features:
IPv6
Features:
RIP v1
Features:
RIP v2
Features:
OSPF
Features:
dual firmware image
Features:
802.1q VLAN
Features:
802.1p CoS
Features:
bandwidth limiting
Features:
19" rack mountable
View AllClose

0 Reviews

View AllClose