RB-BIDI1310-SAVER LGX box format BiDi combiner fiber saver, passive, reduces 2 fiber 1310nm connections to 1 fiber only, doubling fiber capacity

(No reviews yet) Write a Review
SKU:
RB-BIDI1310-SAVER
Availability:
Not a stock item, ships in 15 days from order date
  • RB-BIDI1310-SAVER LGX box format BiDi combiner fiber saver, passive, reduces 2 fiber 1310nm connections to 1 fiber only, doubling fiber capacity
  • RB-BIDI1310-SAVER LGX box format BiDi combiner fiber saver, passive, reduces 2 fiber 1310nm connections to 1 fiber only, doubling fiber capacity, rear view

Quantity Discount

Product price $369.00
Buy 5 or above $350.55
MSRP: $499.00
$369.00
— You save $130.00

Description

The RB-BIDI1310-SAVER is a special passive 1310nm filter that is intended to be used on duplex 1310nm fiber connections and push both optical signals over only one single strand of SMF instead of the traditional 2 fibers.

 

By using the TFF (Thin Film Filter) technology, common duplex fiber circuits running at 1310nm will be converted to run on a single strand of fiber. This allows packed high density datacenters, mostly running high speed 100G LR4 or ER4 duplex optics to move those connections from to strands to only one strand of fiber. By using the passive RB-BIDI1310-SAVER filter (one at each end of a duplex LR4 or ER4 transceiver), the available fiber plant is practically doubled. The passive 1310nm centered fiber saver is presented in an LGX boxed format with SC and LC optical connectors. Casing is made of aluminum and they use ABS capsule for the filters inside. The LGX box format can be installed in the 4 slot 1RU chassis for higher density fiber saver devices.

Technical Specifications for RB-BIDI1310-SAVER

Wavelength

1310nm

Rate

40G/100G

Insertion Loss

≤ 1dB

Technology

TFF (Thin Film Filter)

Insertion Loss

≤ 2.7dB

Isolation

≥35dB

Polarization Dependent Loss

≤ 0.1ps

Return Loss

≥ 45dB

TDL (dB)

≤0.15dB 

PMD (ps)

≤0.055nm

Return Loss

≥ 45dB

Directivity

≥ 45dB

Power handling

≤500mW

Fiber Type

SMF-28e

Connector

LC/UPC, SC/APC

Temperature

Operating -40 to 85°C

Storage -40 to 85°C

Net Weight

LGX BOX :0.5KG

4Slot 1u Rack: 2.5KG

Dimensions (HxWxD)

LGX BOX   214.5*150*20mm

4Slot 1u Rack 44*440*160mm

 

Additional fiber converter/combiner RB-BIDI1310-SAVER information: RB-BIDI1310-SAVER PDF datasheet.

View AllClose

Warranty Information

Product is guaranteed free of manufacturer defects. If any fault caused by manufacturing process is found, product is replaced under warranty. Faults of manufacturing do not include misuse or normal wear and tear of the product.
View AllClose

Additional Information

Fiber Type:
SMF 0.9mm jacket
Connectors:
SC/APC, LC/UPC
Cable Type:
9/125um single-mode
View AllClose

0 Reviews

View AllClose