CTCUnion
MSW-4204S-AD 2x 10G SFP+ and 4x Gigabit RJ45 EDD switch (Ethernet Demarcation Device) for Metro Ethernet networks w/ full 802.3ah OAM support (NID), SyncEthernet support, AC and DC power inputs
- SKU:
- MSW-4204S-AD
- Availability:
- Not a stock item. Ships in 15 days from order date.
Description
Product description
The next generation Carrier Ethernet Network Interface Device (NID) is designed for business class Ethernet connectivity. The MSW-4204S is equipped with 2 SFP+ slots, dual rate 1G/10Gbps and 4 ports Gigabit RJ45 network interfaces. It can be configured as either UNI or NNI device which are CE(Carrier Ethernet) 2.0 compliant for Metro Ethernet network deployments.
The MSW-4204S is positioned as an universal network interface device (NID) for most carrier Ethernet access applications. It has built-in hardware based Ethernet OAM engine and is compliant to the latest OAM standards to deliver the committed SLA performance KPIs measurement on a per service basis.
Every Ethernet copper or fiber port on MSW-4204S except management port can be configured to deliver the timestamp messages of SyncE or IEEE 1588v2 inside Ethernet packets for the precision time purpose of mobile backhaul network. MSW-4204S is built-in 1PPS/ToD input and output SMA connectors. The output SMA interface supports the waveform measurement of IEEE 1588v2 via external instrument as well as the input SMA interface can be connected to external time source as the reference clock for the network. Advanced clock synchronization features for carrier Ethernet network allows operators to deliver time sensitive services with optimal stability and continuity in the end-to-end connectivity.
Voice VLAN; MAC based VLAN; Protocol based VLAN;
IP subnet based VLAN;Private VLAN for port isolation; VLAN translation;GVRP
- ITU-T Y.1564
Technical specifications
| Interfaces: | Four RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and two SFP+ slots for 802.3z 100/1000Base- SX/LX/ZX standards |
| Connectors: | 4 x RJ-45 copper 10/100/1000 Mbps and 2 x SFP+ slot 1G/10G, DB9 RS232 serial console for management, 1PPS/ToD port: SMA connector × 2 (input/output) |
| UTP ports: | MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 10Kbytes (Jumbo support) |
| Optical slot: | Small Form Pluggable - supports Auto and Forced mode operation and dual rate 1G and 10G Base-X operation |
| Front LEDs: | FEF, Fiber Link 1, Fiber Link 2, ACT, Link 3, Link 4 |
| Power: | Internal 90-260V AC switching power supply, 3 pin IEC connector C14, AC power cord C13 with US style main plug included in package; DC48V 3 screw block connector |
| Temperature: | 0~50°C (Operating); -20~80°C (Storage) |
| Humidity: | 10~90% non condensing (Operating); 0 90% (Storage) |
| Consumption: | less than 20W |
| Dimensions(WxDxH): | 215mm x 190mm x 44mm |
| Weight: | 780g (without power cord) |
| Compliance: | CE, FCC Class A |
| MTBF: | 85,000 hours |
Additional information on MSW-4204S-AD EDD 10G/Gigabit switch: 
PDF Datasheet.
Note: For SFP transceiver modules that can be used together with the MSW-4204S switch please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.
Additional Information
Interface Type: |
Fast Ethernet |
Interface Type: |
Gigabit Ethernet |
Interface Type: |
10G |
Management: |
web-managed |
Management: |
SNMP |
Management: |
local console |
Management: |
telnet |
Transceiver Format: |
SFP |
Power Type: |
AC 90-240V embedded PSU |
Connectors: |
RJ45 (Ethernet) |
Connectors: |
DB9 |
Connectors: |
SFP slot |
Features: |
RSTP |
Features: |
MSTP |
Features: |
802.3ad LACP |
Features: |
G.8032 Ring |
Features: |
IGMP snooping |
Features: |
IPv6 |
Features: |
802.3ah OAM |
Features: |
802.1ag CFM |
Features: |
ITU-T Y.1731 |
Features: |
802.1q VLAN |
Features: |
port based VLAN |
Features: |
802.1p CoS |
Features: |
dying gasp |
Features: |
bandwidth limiting |
Features: |
9K Jumbo frame support |
Related Products
CTCUnion
MSW-4204-AD 2x 10G SFP+ and 4x Gigabit RJ45 EDD switch (Ethernet Demarcation Device) for Metro Ethernet networks w/ full 802.3ah OAM support (NID), AC and DC power inputs
CTCUnion
MSW-202 Gigabit Ethernet EDD switch (Ethernet Demarcation Device) for Metro Ethernet networks w/ full 802.3ah OAM support
CTCUnion
FRM220-MSW404 Gigabit Ethernet EDD switch (Ethernet Demarcation Device) for Metro Ethernet networks w/ full 802.3ah OAM support (NID)
CTCUnion
MSW-4424C-AD - Gigabit Ethernet 24 SFP ports with 4 10G SFP+ ports, Layer 2 managed switch, dual redundant AC and DC48 power, rack 19"
CTCUnion