MSW-202 Gigabit Ethernet EDD switch (Ethernet Demarcation Device) for Metro Ethernet networks w/ full 802.3ah OAM support

(No reviews yet) Write a Review
SKU:
MSW-202
UPC:
811704013971
Availability:
Ships same day for orders placed before 3:30PM PST
MSRP: $695.00
$424.00
— You save $271.00

Description

Product description
The MSW-202 Ethernet Demarcation Device (EDD) is a 4 port Gigabit Ethernet switch designed for Metro Ehernet access applications and supporting OAM 802.3ah management features. The converter has it's own IP address and can be directly managed and used as a DEMARC device. 802.3ah OAM management is supported. Any 1000Base-SX/LX/LHX/ZX or WDM/CWDM SFP transceiver can be installed in the SFP slots of the MSW-202 converter. VLAN settings can be performed to aggregate traffic into a 4 port Gigabit switch. Unit supports web-based (own IP or chassis) and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. MSW-202 can accommodate any type of miniGBIC (SFP) optical modules 100 or 1000Base-X, either multi-mode, singlemode or single strand Bi-Directional type. Unit is offering unparalleled flexibility and easy migration from short-haul to long haul fiber connections by simply changing the optical module interface. The Gigabit copper interface has auto-negotiation and speed selection from 10 to 1000 Mbps.

Features
MEF 9, MEF 14: EPL and EVPL
Support 8K MAC Spanning Tree 802.1D, 802.1s, 802.1w
Support 802.1q / 256 active VLANs Double VLAN Tagging (C-tag/S-tag) (IEEE 802.1ad) support for ISP application
Various QoS capability (MAC/port/802.1p/Diffserv) Port-based rate limiting
DHCP Snooping
IGMP Snooping
IPv6 support
802.3x and 802.1x support
Jumbo frame for up to 9.6K
Extensive OAM-P support: 802.3ah OAM, 802.1ag & Y.1731, SNMP v1/v2c/v3, Telnet, Web GUI


Technical specifications

Interfaces: Two RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and two SFP slots for 802.3z 100/1000Base- SX/LX/ZX standards
Connectors: 2 x RJ-45 copper 10/100/1000 Mbps and 2 x SFP slot 100/1000Mbps
UTP port: MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 9.6Kbytes (Jumbo support)
Optical slot: Small Form Pluggable - supports Auto and Forced mode operation and dual rate 100 and 1000 Base-X operation
Front LEDs: FEF, Fiber Link 1, Fiber Link 2, ACT, Link 3, Link 4
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0~50°C (Operating); -20~80°C (Storage)
Humidity: 10~90% non condensing (Operating); 0 90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm
Weight: 340g (without AC adapter)
Compliance: CE, FCC Class A
MTBF: 65,000 hours


Additional information on MSW-202 EDD Gigabit switch: PDF Datasheet; PDF Installation Manual.

Note:
For SFP transceiver modules that can be used together with the MSW-202 switch please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
Gigabit Ethernet
Management:
web-managed
Management:
SNMP
Management:
telnet
Transceiver Format:
SFP
Power Type:
separate AC adapter included
Connectors:
RJ45 (Ethernet)
Connectors:
SFP slot
Features:
RSTP
Features:
MSTP
Features:
802.3ad LACP
Features:
G.8032 Ring
Features:
IGMP snooping
Features:
IPv6
Features:
802.3ah OAM
Features:
802.1ag CFM
Features:
ITU-T Y.1731
Features:
802.1q VLAN
Features:
port based VLAN
Features:
802.1p CoS
Features:
bandwidth limiting
Features:
9K Jumbo frame support
View AllClose

0 Reviews

View AllClose