IMC-100-PHE12-SC030 - Fast Ethernet to singlemode 30Km industrial fiber media converter with PoE 30W output, -20-75 Celsius

(No reviews yet) Write a Review
SKU:
IMC-100-PHE12-SC030
MSRP: $369.00
$276.00
— You save $93.00

Description

Product description

The IMC-100-PHE12-SC030 is a non-managed Fast Ethernet media converter that supports conversion between electrical 10/100Base-Tx and Ethernet single-mode 9/125um fiber up to 30Km reach (SC)with PSE (Power Source Equipment) to provide PoE+ power over Ethernet. The IMC-100-PHE12-SC030 has a fixed dual SC connector for 100Base-FX single-mode fiber operation up to 30Km reach. Housed in rugged DIN rail or wall mountable enclosures, this converter is designed for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and is also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications.

Industrial designed converters feature rugged design with metal housings or wall mounting for DIN Rail mounting, highly reliable electrical design to support very high MTBF (mean time between failure), enhanced safety and surge protection, better EMS (Electro Magnetic Susceptibility), as well as expanded operating temperature ranges. The IMC-1000S media converter is available in two operating temperature ranges, a standard -10° to 60°C model range or an extended -20° to 75°C range (IMC-1000S-PHE12 model).

  • Conversion between 10/100Base-Tx and 100Base-FX SMF optical interface
  • 12/24/48VDC (9.6~57VDC) redundant dual input power with built-in very high efficiency booster (97~99%) to rise up 55 VDC for PoE output
  • Regulate PoE output voltage (55VDC) to stabilize PoE device, and guarantee delivery PoE power distance to 100meter
  • Provides IEEE802.3at PoE output (30Watts)
  • Supports Remote PD reset by fiber port link down
  • Supports LFPT (Link Fault Pass Through)
  • IP30 rugged metal housing and fanless
  • Wide operating temperature -20~75°C (IMC-100-PHE12)
  • CE, FCC, Railway traffic EN50121-4 certification
  • Industrial grade EMS,EMI EN61000-6-2, EN61000-6-4 certification
  • Supports Jumbo frame 9K bytes packet

Technical specifications
Interfaces: RJ45 10/100Base-Tx port and 100Base-FX SM fiber port
Operating wavelength: 1310nm
Operating distance: up to 30Km
Optical connector: SC duplex(ST available by special order)
Front LEDs: PWR1, PWR2, Fault, Link/Act (fiber), Speed, Link/Act (copper)
Power: dual DC 10~58V input power supplies (screw block connector)
Temperature: -20~75°C (Extended Range)
PoE Output Power: max. 30W compatible 802.3af/at
Temperature: -20~75°C (Extended Range)
Humidity: 5~95% non condensing
Consumption: less than 35.4W
Dimensions(WxDxH): 106 x 38.6 x 142.1mm
Weight: 650g
Compliance: EMC CE
EMI FCC Part 15 Subpart B Class A, CE EN 55022 Class A
Railway Traffic EN50121-4
Immunity for Heavy Industrial environment EN 61000-6-2
Emission for Heavy industrial environment EN 61000-6-4
EMS EN61000-4-2 (ESD) Level 3, Criteria B
EN61000-4-3 (RS) Level 3, Criteria A
EN61000-4-4 (EFT) Level 3, Criteria A
EN 61000-4-5 (Surge) Level 3, Criteria B
EN 61000-4-6 (CS) Level 3, Criteria A
EN61000-4-8 (PFMF) Field strength 300A/m Criteria A
Safety UL60950-1 (pending)
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Warranty 5 years
MTBF: >432,000 hours, MIL-HDBK-217


Additional information on IMC-100-PHE12-SC030: PDF datasheet, PDF manual.
View AllClose

Warranty Information

5 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Fiber Type:
single-mode
Management:
un-managed
Wavelength:
1310nm
Tx Distance:
30Km
Power Type:
redundant
Power Type:
DC 10~60V embedded PSU
Connectors:
SC
Connectors:
RJ45 (Ethernet)
Connectors:
screw block
Cable Type:
duplex
Cable Type:
9/125um single-mode
PoE Output:
30 Watts/port
Type:
Industrial(hardened)
Features:
9K Jumbo frame support
Features:
LFP Link Fault Pass through
Features:
DIN rail mountable
View AllClose

0 Reviews

View AllClose