IGR-1604XSM-16PH - 16 copper + 4x 1G/2.5G/10G SFP+ port SNMP/web-managed Layer 3 Ethernet Industrial switch, PoE 300W

Product Description

The IGR-1604XSM-16PH is a Layer 3 Industrial 16-port RJ45 PoE+ Gigabit Ethernet routing switch with 4-port 10G/2.5G/1G SFP+ slots, for SFP pluggable transceivers. Each RJ45 PoE port supports IEEE802.3af/at standard with maximum 30W power output, while the total PoE power budget is 300Watts. Switch can be used to connect and feed various types of Ethernet PD devices, such as smoke sensors, Wi-Fi access points, femtocells, alarm centers or IP cameras. The din-rail and fan less 20-port switch has a hardened design for high surge protection, wide operating temperature and it is safety certified to meet critical requirements.

Features

• 16x 10/100/1000Base-T RJ-45 and 4x 10G/2.5G/1G SFP+ Fiber ports
• 48VDC (44-57VDC) redundant dual input power, and built-in power booster design upto 55 VDC for PoE/PoE+ output
• Constant and regulated PoE output voltage at 55VDC
• Provides 16-port IEEE802.3af / 802.3at PoE+ output (30W per Port)
• Maximum PoE output power budget 300W
• Advanced PoE Management, PoE PD Failure Auto Checking and auto reset, PoE configuration for power planning, weekly scheduling
• UL60950-1, CE, FCC, Rail Traffic EN50121-4 certified
• Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
• Cable diagnostic, Measuring cable OK or broken point distance
• Supports Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power consumption
• STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring (EPR) for redundant cabling
• Provide up to 5 instances that each supports u-Ring, u-Chain or Sub-Ring type for flexible uses
• u-Ring for Redundant Cabling, recovery time<10ms in 250 maximum devices
• DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
• IPv4/v6 Static Routing Supported
• RIP v1/v2 Dynamic Routing Supported
• OSPF v2, OSPF v3 Dynamic Routing Supported
• Layer 3 Redundancy VRRP v2, v3
• QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ
• IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, MVR
• Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
• IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2
• Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
• Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgrade failure
• RMON, MIB II, Port mirroring, Event syslog, DNS, NTP/SNTP, IEEE802.1ab LLDP
• Supports IPv6 Telnet server /ICMP v6
• CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management
• SmartView Management System support
• Supporting Central EMS for management of up to 50 SmartView Server, and maximum up to 25,000 device

Additional information on IGR-1604XSM-16PH series: PDF datasheet; PDF Installation Manual; PDF Management Manual.
For SFP transceiver options please visit our SFP pages or contact our sales department by e-mail or call us.