IFC-FDC-SC002 - RS-232, RS-485, RS-422 over daisy chain dual port multimode fiber industrial media converter, 2Km, 2.5kV isolation, -10-60 Celsius

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
MSRP: $450.00
— You save $71.00


Product description
The IFC-FDC Series are industrial grade fiber media converters that provide dual fiber connections to extend asynchronous RS-232, RS-485 or RS-422 serial transmissions over a distance of up to 2km using multimode fiber or up to 60km using single mode fiber. The dual fiber inputs allow connecting multiple devices in a cascade or "daisy chain" fashion as well as creating ring architecture for fiber redundancy. The converter is capable of selecting interface modes for connection to RS-232 (3 or 5 wire), RS-485 (2 or 4 wire, half or full duplex) or RS-422 (4 wire, full duplex). The IFC-FDC Series secures asynchronous serial data transmissions over EMI resistant fiber at speeds up to 1024kbps. IFC-FDC Series media converters feature two alarm relay contacts and two redundant DC power inputs. The IFC-FDC Series reliable industrial design is perfect for keeping your industrial automation applications running smoothly and continuously. The IFC-FDC Series media converters are available in two operating temperature ranges, a standard -10° to 60°C model range or an extended -40° to 75°C range.

Extend serial transmission distance up to 2km, 30km, 60km
Supports fiber daisy chain or ring connections
Redundant dual power inputs (12~48VDC)
Supports dual fiber link redundancy
Supports RS-232, RS-422, RS-485(2/4 wire) transmission to dual fiber connections.
Enhanced serial baudrate up to 1024kpbs
2.5KV isolation for serial signal
Supports relay output for power or link failure warning
Hardened housing with IP30 protection
Fan-less and DIN-Rail design for harsh industrial environment
Adjustable pull high/low resistor and terminator for RS-422/485 transmission

Technical specifications
Interfaces: 6 pin screw block connector for RS-485/RS-232/RS-422 serial asynchronous port and dual SC 155M fiber ports w/ daisy chain support
Operating wavelength: 1310nm 
Operating distance: up to 2Km on 50/125um or 62.5/125um fiber
Optical connector: SC
Front LEDs: PWR1, PWR2, Alarm, Master, TD, RD, Fiber1 Link, Fiber2 Link, Ring
Power: dual DC 9~58V input power supplies (screw block connector)
Temperature: -10~60°C (Operating); -40~75°C (Extended Range model IFC-FDC-E)
Humidity: 5~95% non condensing
Consumption: less than 5W
Dimensions(WxDxH): 106 x 38.6 x 142.1mm
Weight: 380g
Compliance: CE, FCC Class A, EMI: EN55022 Class A, Vibration : IEC 60068-2-6
Shock : IEC 60068-2-27, Free Fall : IEC 60068-2-32
MTBF: 300,000 hours

Fiber power budget according to available models
Model Distance Lambda Min. Output (dBm) Sensitivity (dBm) Power Budget (dB)
IFC-FDC-SC002 2Km 1310nm -20 -31 11
IFC-FDC-SC030 30Km 1310nm -20 -35 14
IFC-FDC-SC060 60Km 1550nm -15 -35 20

Additional information on IFC-FDC series: PDF datasheet, PDF manual, PDF installation guide.

Note: Currently only the IFC-FDC-SC002 for multimode fiber is always available in stock. Singlemode 1310nm - 30Km and 1550nm - 60Km are available on request. For such converters, please contact our sales department by e-mail or call us.
View AllClose

Additional Information

Interface Type:
Interface Type:
Fiber Type:
Tx Distance:
Power Type:
Power Type:
DC 10~60V embedded PSU
screw block
Cable Type:
Cable Type:
50/125um multi-mode
Cable Type:
62.5/125um multi-mode
DIN rail mountable
View AllClose

0 Reviews

View AllClose