GSW-3100C - 10G Ethernet CPE switch 4x 1G/2.5G RJ45 + 1x 10G RJ45 + 1x 1G/10G SFP+ L2 Managed with optional Cable Tray

Product description

CTC Union Technologies unveiled the brand new 10G CPE switch, GSW-3100C, which supports multigigabit technology for active Ethernet based FTTH applications. This new 10G CPE switch is designed with 4 RJ45 ports 10M/100M/1G/2.5Gbps and 1 port 10M/100M/1G/2.5G/5G/10Gbps RJ45 as well as 1 port 1G/10Gbps SFP+ slot for fiber optic connectivity. The GSW-3100C employs the same successful cable tray design, making installation process easier and protecting the excess fiber within the unit.

GSW-3100C new CPE leverages the strength of its chipset provider, which is a member of NBASE-T alliance, by enabling a multigigabit speed feature. Enterprise or residential users will be able to experience reliable and secure Ethernet high speed network access and also connect existing Cat5e/Cat6 cabling infrastructure with IEEE 802.11ac wave 2 or WiFi 6 devices, breaking through the limitation of 1Gbps data rate for content richer applications such as Cloud storage, 4K video streaming or HD/UHD teleconferencing.

CTC Union Technologies has adopted the new generation SoC single chip inside the GSW-3100C. Chipset is developed through highly circuit integration and manufactured using advanced wafer process. Therefore, GSW-3100C benefits of a low power consumption and cost-effective finished product adopting this SoC solution compared with the previous generation product which was the combination of multiple chips. However, The GSW-3100C continues supporting most popular Layer 2 feature sets with network management interfaces such as Web GUI and SNMP. The GSW-3100C also supports ZTP (Zero Touch Provisioning) function which is suitable for very large-scale deployments from operators or service providers. These device management features can avoid truck rolls and save OPEX for FTTH service providers.

Specifications

Interfaces:
LAN RJ-45 Port: 100M/1G/2.5G x 4 + 100M/1G/2.5G/5G/10G x 1
WAN Fiber Port: 1G/10G SFP+ x 1
Hardware:
Supports Auto-negotiation for 2.5G RJ45 Port (100M/1G/2.5G and Full/Half Duplex mode)
Supports Auto-negotiation for 10G RJ45 Port (100M/1G/2.5G/5G/10G and Full/Half Duplex mode)
Supports Auto MDI / MDIX auto-crossover for TP ports
Store and forward switching
8 megabits of integrated shared packet memory
Supports 16K MAC Address Table
Supports 10K Bytes Jumbo Frame size
Standard Compliance:
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/FX
IEEE 802.3ab 1000BASE-T
IEEE 802.3bz 2.5GBASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3ae 10GBASE-SR
IEEE 802.3x Flow Control
IEEE 802.1p QoS
IEEE 802.1Q VLAN Tagging
IEEE 802.1ad Q-in-Q Provider Bridges
IEEE 802.3ad Link aggregation
IEEE 802.1x Port based network access
IEEE 802.1D MAC Bridges/STP
IEEE 802.1w RSTP
IEEE 802.1s MSTP
IEEE 802.1ab Link Layer Discovery Protocol
IEEE 802.3az Energy Efficient Ethernet (EEE) function
VLAN Features:
IEEE 802.1Q tagged VLAN (1K VLAN groups)
IEEE 802.1ad Q-in-Q VLAN
MAC Based VLAN
Private VLAN for port isolation
Link Aggregation & Protection:
Static trunk (SA, DA, IP, TCP/UDP port)
IEEE 802.3ad LACP
STP/RSTP
Loop Protection
QoS Features:
Hard wired IEEE 802.1p 8 priority queue per port
Traffic scheduling based on Strict / WRR priority
CoS based traffic classification on switch port, VLAN ID, DSCP, TCP/UDP port
IEEE 802.1p priority tag remarking / DSCP remarking
Per port/queue based ingress/egress rate limit in steps of 1000kbps
Multicast/Broadcast/Unicast storm control with flooding control
Security Features:
Static port security (MAC based)
Per port limited MAC learning
Port limited flooding of unknown MAC address on fiber uplink port
Port based/MAC based/single/multiple IEEE 802.1x access control
128 ACL rules based on L2~L4 information
IP/MAC binding
IP source guard & ARP inspection
HTTPs
IP Multicasting:
IGMP snooping v1/v2/v3, MLD snooping v1/v2
IGMP fast leave / query
IGMP filtering / throttling
Management:
Management via Web / HTTP
Support SNMP v1 & v2c, RMON I (1, 2, 3, 9 groups), RFC 1213 MIB (MIB-II) and Private MIB
Support dying gasp in trap message
Support DHCP client for IPv4/IPv6
Support DHCP Snooping
DHCP Auto Provisioning for firmware and configuration upgrade based on
．Option 60: Class identifier
．Option 66: Server IP
．Option 67: File name
．Option 254: File type
TFTP/HTTP based Firmware and configuration upgrade
Dual Bank Image
DNS client/proxy
Port mirroring
NTP client
UPnP
Power Input: AC/DC power adaptor, 12VDC/1A
Operating Temperature: 0~40°C
Storage Temperature: -25~70°C
Humidity: 5%~90% (non-condensing)
Certification: CE, FCC class A

Additional information on GSW-3100C: PDF Datasheet; PDF Manual.