CTCUnion

The BLN-3010 device allows conversion of E1 signal from balanced to unbalanced and back. 1.6/5.6 jack 75ohm interface is passively converted to 120 balanced twisted pair copper. BLN-3010 converts...

The BLN-4010 device allows conversion of E1 signal from balanced to unbalanced and back. BNC 75ohm interface is passively converted to 120 balanced twisted pair copper. BLN-4010 converts only one...

Product descriptionThe ITU-T G.703 balun panel matches multiple sets of dual 75 ohm coax connections to multiple 120 ohm twisted pair connections, supporting data stream rates of 2-8 Mbps for E1 and...

The FRM220-CH01-DRK02 is an optional metal bracket that helps installing any FRM220 single slot casings with embedded power supply on a DIN rail TS-35 type. Casings supporting embedded power supply...

Product description  he ICR-4103 series are high-performance industrial grade 4G-LTE cellular routers. It is designed to offer the fast connectivity over cellular network for industrial...

Product description The ICR-W401 is a compact, lightweight and cost-effective Industrial grade 4G LTE gateway that has 1 LAN plus 1 WAN Fast Ethernet connection and supports uplink to 2G/3G/4G...

The serial to Ethernet device server STE211 is bridging RS-232 and RS-422/RS-485 Serial Data communications devices to Ethernet IP networks. STE211 connects serial devices such as PLC, alarm sensors...

The serial to Ethernet device server STE211W is bridging RS-232 and RS-422/RS-485 Serial Data communications devices to Ethernet IP networks either via RJ45 wired or IEEE 802.11b/g/n WiFi wireless...

The GW211W-MB is a Wi-Fi / Ethernet / Serial MODBUS Gateway bridging RS-232 and RS-422/RS-485 Modbus Serial RTU Data to Modbus Ethernet IP networks either via hardwired RJ45 Ethernet or a wireless...

The STEA-DRK01 is a convenient DIN rail installation kit for the STE-100A, STE211, STE211W or GW211W-MB IP Device Servers. All models accept wide DC power input, suitable for light industrial...

Important note: ET100A supports RS530 interface directly (no cable needed). If you need to use V.35, X.21, RS-449 or RS-232 interfaces, you need an adapter cable. We offer one such cable free with...

SP-SE-B01 is an in-line BNC coaxial cable surge protector. It installs simply between the wall plug and equipment behind, having 2 opposite gender BNC connectors.  It protects any coaxial cable...

The FRM220-RMK23 is an optional metal plate set that helps installing one unit of the 19" wide FRM220-CH20 series chassis in a 23" wide equipment rack.

Product descriptionINJ-IG01-PHE is an industrial grade, single port, gigabit Ethernet PoE (Power over Ethernet) injector with power boost technology. PoE describes a system to pass electrical power...

Product descriptionThe industrial grade, Gigabit, Passive, PoE injector (INJ-IG02-PHE) can provide up to 60Watts power out through the 4 pairs of category 5e/6 cables. The injector operates with...

Product description The INJ-IG03-PH is an active IEEE 802.3af/at PoE converter to passive PoE. Such instrument is crucial to integrate non-IEEE compatible PoE devices. These passive PoE devices do...