CTCUnion

Product description  The CAB-M12AM8-RJ45 is an Ethernet Cat5e cable with an M12 IP67 Amphenol male connector with 8 contacts for Ethernet ITP series Industrial switches and an RJ45 male end...

Product description  The CAB-M12DM4-RJ45 is an Ethernet Cat5 cable with an M12 IP67 Amphenol male connector with 4 contacts suitable only for Fast Ethernet ITP series Industrial switches and an...

Product description  The CAB-M12DM4-RJ45S is an Ethernet Cat5 cable with an M12 IP67 Amphenol male connector with 4 contacts suitable only for Fast Ethernet ITP series Industrial switches and...

The Balun-B2S device allows conversion of E1 signal from balanced to unbalanced and back. BNC 75ohm interface is passively converted to 120 balanced twisted pair copper. Balun-B2S converts two female...

The Balun-PS device allows conversion of E1 signal from balanced to unbalanced and back. BNC 75ohm interface is passively converted to 120 balanced twisted pair copper. Balun-PS converts two male...

The BLN-3010 device allows conversion of E1 signal from balanced to unbalanced and back. 1.6/5.6 jack 75ohm interface is passively converted to 120 balanced twisted pair copper. BLN-3010 converts...

The BLN-4010 device allows conversion of E1 signal from balanced to unbalanced and back. BNC 75ohm interface is passively converted to 120 balanced twisted pair copper. BLN-4010 converts only one...

Product descriptionThe ITU-T G.703 balun panel matches multiple sets of dual 75 ohm coax connections to multiple 120 ohm twisted pair connections, supporting data stream rates of 2-8 Mbps for E1 and...

Product description  he ICR-4103 series are high-performance industrial grade 4G-LTE cellular routers. It is designed to offer the fast connectivity over cellular network for industrial...

Product description The ICR-W401 is a compact, lightweight and cost-effective Industrial grade 4G LTE gateway that has 1 LAN plus 1 WAN Fast Ethernet connection and supports uplink to 2G/3G/4G...

The serial to Ethernet device server STE211 is bridging RS-232 and RS-422/RS-485 Serial Data communications devices to Ethernet IP networks. STE211 connects serial devices such as PLC, alarm sensors...

The serial to Ethernet device server STE211W is bridging RS-232 and RS-422/RS-485 Serial Data communications devices to Ethernet IP networks either via RJ45 wired or IEEE 802.11b/g/n WiFi wireless...

The GW211W-MB is a Wi-Fi / Ethernet / Serial MODBUS Gateway bridging RS-232 and RS-422/RS-485 Modbus Serial RTU Data to Modbus Ethernet IP networks either via hardwired RJ45 Ethernet or a wireless...

The STEA-DRK01 is a convenient DIN rail installation kit for the STE-100A, STE211, STE211W or GW211W-MB IP Device Servers. All models accept wide DC power input, suitable for light industrial...

Important note: ET100A supports RS530 interface directly (no cable needed). If you need to use V.35, X.21, RS-449 or RS-232 interfaces, you need an adapter cable. We offer one such cable free with...

SP-SE-B01 is an in-line BNC coaxial cable surge protector. It installs simply between the wall plug and equipment behind, having 2 opposite gender BNC connectors.  It protects any coaxial cable...

The FRM220-RMK23 is an optional metal plate set that helps installing one unit of the 19" wide FRM220-CH20 series chassis in a 23" wide equipment rack.

HCT-6000A is portable protocol analyzer for datacom interfaces up to 128Kbps and a complete E1/ T1 Bit Error Rate Tester up to 128Kbps. The handheld device has an internal battery, an LCD screen with...

HCT-6000 is portable protocol analyzer for datacom interfaces up to 128Kbps and a complete E1/ T1 Bit Error Rate Tester up to 2Mbps. The handheld device has an internal battery, an LCD screen with...

BTM10 is state of the art portable protocol analyzer for E1/T1 and 2Mbps datacom interfaces and a complete E1/ T1 Bit Error Rate Tester. The handheld device has an internal battery, an LCD screen...