TSP-101-DIN Telephone line surge protector RJ11 in-line LED indicator, DIN rail mountable

TSP-101-DIN is an in-line RJ11 telephone line surge protector. It installs simply between the wall plug and equipment behind, having 2 opposite gender RJ11 connectors. It protects any telephone line devices like fax machines, answering machines, modems, dial-up alarm systems, etc. The TSP-101-DIN is TS-35 DIN rail mountable and has a grounding/earthing screw pin in the back.

The TSP-101-DIN includes a short (5") 2 wire RJ-11 to RJ-11 phone line cable in the box.

Features of TSP-101-DIN telephone line surge protector
Controls transient over voltages to protect sensitive electronic equipment
Meets IEC 61643-21; GB 18802.21; YD/T 1542, CE (LVD, EMC); Rohs standards and certifications
LED indicator for off-hook and ringing on telephone line
Easy installation: one RJ-11 male connector and one RJ-11 female connector

Technical specifications
- Nominal voltage: Un=110V
- Rated voltage (max. continuous voltage): Ul= 170V-/ 120V~
- Nominal current: I=0.5A
- Lightning impulse current (10/350): Iimp=5kA
- Nominal discharge current (8/20): In=5kA per line, 10kA total
- Voltage protection level at In: Up<=700V(line-line) / <= 560V (line-PG)
- Response time: T <= 1ns (line-line) / <= 100ns (line-PG)
- Bandwidth: F=16MHz (line-PG)
- Series impedance per line: R=1.8 Ohms
- Operating temperature: -40 to +85 Celsius
- Relative humidity: less than 95% (at 25 deg. Celsius)
- Connectors: 2x RJ-11 shielded
- Grounding: screw terminal
- Mounting: 35mm DIN rail (TS-35)
- Enclosure material: Aluminum
- Dimensions: 30mm x 80mm x 27mm
- Weight: 36g
- Compliance: IEC 61643-21; GB 18802.21; YD/T 1542; CE (LVD, EMC); RoHS

Additional information on TSP-101-DIN: PDF Datasheet