ROBOfiber
RBG-T4804M3-AC - Full Gigabit Ethernet 48 ports, 4x 10G SFP+ ports Layer 3 managed routing switch, rack 19"
- SKU:
- RBG-T4804M3-AC
- UPC:
- 811704017528
- Availability:
- Ships same day for orders placed before 3:30PM PST
Description
Product description
RBG-T4804M3-AC Layer 3 switch design is 1RU/19” wide box with 48x 10/100/1000Base-Tx ports and 4x 10G/1G SFP+ ports, powered by a high-performance ASIC switch chip, supporting 32K MAC addresses and 32K routing items and offering redundant power input. Supports Virtual Cluster Switching Technique: the logic control plane, service control plane and service data plane are separated and therefore device can support continuous Layer3 routing forwarding, avoiding service interruption as a result of a single point of failure.
Features
VLAN: 4K Active VLAN, QinQ & Selective QinQ, GVRP, Private VLAN, Voice VLAN
Spanning Tree: 802.1D (STP) 802.1W (RSTP) and 802.1S (MSTP) BPDU guard, root guard and loopback guard
Multicast: IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave, MVR, IGMP filter
IP: Static route, IPv4/v6 dual stack
Accessories: Power cord, rackmount kits, console cable
QoS: CAR, HQoS, MAC/IP/TCP/UDP/ VLAN/ COS/ DSCP/ TOS based QoS, 802.1P/ DSCP priority re- labeling, SP, WRR and “SP+WRR”, Tail-Drop, WRED, flow monitoring and traffic shaping
Security: Port isolation, Port security, and “IP+MAC+port” binding, MAC sticky DHCP Snooping and option 82, DAI & IP source guard, PPPoE+, IEEE 802.1x, Radius and BDTacacs+ L2/L3/L4 ACL flow identification and
filtration, Anti-attack from DDoS, TCP’s SYN Flood, UDP Flood, etc. Broadcast/multicast/unknown unicast storm-control MD5, SHA-256, RSA-1024, AES256, etc.
Reliability: Static/LACP link aggregation, Interface backup EAPS and ERPS , ISSU uninterrupted system upgrade
Management: Console, Telnet, SSH v1/2, HTTP, HTTPS SNMP v1/v2/v3, RMON TFTP, FTP, SFTP NTP ZTP(Zero Touch Provisioning), SPAN, RSPAN
Environment: Operating temperature/humidity: 0°C -50°C ,10%-90% non-condensing
Storage temperature/humidity: -20°C -70°C , 5%-95% non-condensing
Certification: CE, FCC, ROHS
Specifications
PART No. | RBG-T4804M3-AC |
Interface | 48× 10/100/1000Base-Tx ports, 4×10GE/1G SFP+ ports |
Console | 1× RJ45 (serial RS-232 DB9 cable included) |
Backplane | 176 Gbps |
Forwarding Rate | 132 Mpps |
Total output BTU (1000BTU/H=293W) | 1347.44 |
Fan Number | 2 |
Noise@25°C(dBA) | 45 |
MTBF (h) | > 60,000 |
Forwarding Mode | Store-and-Forward |
Flash (MB) | 16 |
DRAM (MB) | 256 |
MAC Address Table Size | 32K |
Buffer Size (MB) | 4 |
Jumbo Frame Size | 9K |
Total SVI | 10 |
Power Supply | AC:100V-240V,50/60Hz ±10% 100W |
Power Consumption | |
Full load | < 40W |
Chassis | |
Dimensions (WxDxH) (mm) | 440 x 280 x 44 |
Weight (Kg) (unpopulated) | 4.3 |
Additional information on RBG-T4804M3-AC switch: PDF Datasheet
Additional Information
UPC: |
811704017528 |
Interface Type: |
Gigabit Ethernet |
Management: |
web-managed SNMP local console telnet |
Power Type: |
AC 90-240V embedded PSU |
Connectors: |
RJ45 (Ethernet) DB9 SFP slot |
Type: |
Layer 3 |
Features: |
RSTP MSTP 802.3ad LACP IGMP snooping IPv6 RIP v1 RIP v2 OSPF dual firmware image 802.1q VLAN 802.1p CoS bandwidth limiting 19" rack mountable |