FMC-1800-AD - Gigabit 18 port SFP managed patching hub, 10/100/1000Base-TX to 100/1000Base-X SFP, SNMP, USB, rack 19", AC & DC48 power

(No reviews yet) Write a Review
SKU:
FMC-1800-AD
UPC:
811704014381
Availability:
Ships same day for orders placed before 3:30PM PST
  • FMC-1800-AD - Gigabit 18 port SFP managed patching hub, 10/100/1000Base-TX to 100/1000Base-X SFP, SNMP, USB, rack 19", AC & DC48 power
  • FMC-1800-AD - Gigabit 18 port SFP managed patching hub, 10/100/1000Base-TX to 100/1000Base-X SFP, SNMP, USB, rack 19", AC & DC48 power
  • FMC-1800-AD - Gigabit 18 port SFP managed patching hub, 10/100/1000Base-TX to 100/1000Base-X SFP, SNMP, USB, rack 19", AC & DC48 power
MSRP: $1,600.00
$1,200.00
— You save $400.00

Description

Note: SFPs are NOT included with the unit, they can be ordered separately here.
The FMC-1800 unit supports management by console(USB), web or SNMP.

Product description
FMC-1800 is an 18-channel SFP managed patching hub that converts Ethernet copper 100/1000Mbps to SFPs working at 100Mbps and 1000Mbps. FMC-1800 can connect to any RJ-45 Ethernet switch and supports any third-party standard SFP module from any SFP vendor. FMC-1800 can also be used as an Ethernet copper-to-fiber media converter. With different kinds of fiber optic media, both multi-mode and single mode fiber are available as well as BiDi which allows bi-directional transmissions using only a single fiber to extend the distance of Fast Ethernet and Gigabit Ethernet networks.

The FMC-1800-AD is a great solution for managed high density Gigabit media converters in just 1RU of rack space.


Features

  • 1U” Height 19” 18 channels SFP patching hub
  • 18-port 100/1000Base-T(X) to 18-port 100/1000Base-X SFP
  • Auto MDI/MDIX in TP port
  • Auto-Negotiation in TX port
  • Supports hot-swappable SFPs working at 100 Mbps and 1000 Mbps
  • Supports Web, Telnet, SNMP Management and USB-C console
  • Local configuration via USB-C port
  • Ingress / Egress bandwidth control
  • Supports Link Pass-Through
  • Supports Link loss Alarm
  • Supports any third-party standard SFP module
  • Supports SFP DDMI
  • Supports Jumbo Frame packets up to 16K siize
  • Layer 2 wire-speed conversion with fully transparent function
  • Available with redundant power built-in AC(90-240V) and DC (36-72V)


Technical Specifications

Optical Interface Connector: SFP LC
Number of ports: 18
Data rate: 100/1000Mbps
Duplex mode: Full duplex
Fiber: transparent to SFP style - MM 50/125um, 6.25/125um, SM 9/125um
Distance: depending on SFP model - MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
Wavelength: depending on SFP model - 1310nm, 1550nm, CWDM 1471nm ~ 1611nm
Electrical Interface Connector: RJ45
Number of ports: 18, data rate 10/100/1000Mbps, duplex mode: Half / Full duplex
Cable 10Base-T Cat. 3, 4, 5 UTP
100/1000Base-T(X) Cat.5, 5e or higher
Management: Console, Web, Telnet, SNMP
Control Port: USB-C female
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x
LED Indications: Power FX-Link, Duplex, TX-Link/Act, TX-Speed
Power: 100 ~ 240VAC, 18 ~ 72 VDC
Power Consumption AC: 105 VA DC: 70 W
Dimensions: 180 x 440 x 44mm (D x W x H)
Weight: 3kg (6.5lbs)
Temperature 0 ~ 60°C (Operating), -10 ~ 70°C (Storage)
Certification CE, FCC, LVD, RoHS

Additional information on FMC-1800-AD Gigabit SFP patching hub: PDF datasheet; PDF Installation Manual.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
Gigabit Ethernet
Management:
web-managed
Management:
SNMP
Management:
local console
Management:
telnet
Management:
USB
Transceiver Format:
SFP
Power Type:
AC 90-240V embedded PSU
Power Type:
DC 18-72V embedded PSU
Power Type:
redundant
Connectors:
RJ45 (Ethernet)
Connectors:
SFP slot
Features:
9K Jumbo frame support
Features:
LFP Link Fault Pass through
Features:
19" rack mountable
View AllClose

0 Reviews

View AllClose

Related Products