ROBOfiber
RBG-F4808M3-AC - Gigabit all fiber 48 SFP ports, 8x 10G SFP+ ports Layer 3 managed routing switch, rack 19"
- SKU:
- RBG-F4808M3-AC
- UPC:
- 811704017559
- Availability:
- Ships same day for orders placed before 3:30PM PST
Description
Product description
RBG-F4808M3-AC Layer 3 switch design is 1RU/19” wide box with 48x 100/1000Base-X SFP slots and 8x 10G/1G SFP+ ports, powered by a high-performance ASIC switch chip, supporting 32K MAC addresses and 32K routing items and offering redundant power input (only one AC power supply is supplied by default, power redundancy being optional). Out of the 48 Gigabit SFP ports, 4 ports are combo (each SFP slot is mirrored to an RJ45 copper port) offering local copper connectivity. Switch Supports Virtual Cluster Switching Technique: the logic control plane, service control plane and service data plane are separated and therefore device can support continuous Layer3 routing forwarding, avoiding service interruption as a result of a single point of failure.
Switch supports multiple services like IPv6, MPLS, VPN and network security based on L2/L3/L4 wire-speed switching service. It supports hot firmware upgrade, continuous forwarding, soft restarting and redundancy protection.
Features
VLAN: 4K Active VLAN, QinQ & Selective QinQ, GVRP, Private VLAN, Voice VLAN
Spanning Tree: 802.1D (STP) 802.1W (RSTP) and 802.1S (MSTP) BPDU guard, root guard and loopback guard
Multicast: IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave, MVR, IGMP filter
IP: Static route, IPv4/v6 dual stack
Accessories: Power cord, rackmount kits, console cable
QoS: CAR, HQoS, MAC/IP/TCP/UDP/ VLAN/ COS/ DSCP/ TOS based QoS, 802.1P/ DSCP priority re- labeling, SP, WRR and “SP+WRR”, Tail-Drop, WRED, flow monitoring and traffic shaping
Security: Port isolation, Port security, and “IP+MAC+port” binding, MAC sticky DHCP Snooping and option 82, DAI & IP source guard, PPPoE+, IEEE 802.1x, Radius and BDTacacs+ L2/L3/L4 ACL flow identification and
filtration, Anti-attack from DDoS, TCP’s SYN Flood, UDP Flood, etc. Broadcast/multicast/unknown unicast storm-control MD5, SHA-256, RSA-1024, AES256, etc.
Reliability: Static/LACP link aggregation, Interface backup EAPS and ERPS , ISSU uninterrupted system upgrade; supports Ethernet OAM mechanism, 802.3ah, 802.1ag and ITU-Y.1731
Management: Console, Telnet, SSH v1/2, HTTP, HTTPS SNMP v1/v2/v3, RMON TFTP, FTP, SFTP NTP ZTP (Zero Touch Provisioning), SPAN, RSPAN
Environment: Operating temperature/humidity: 0°C -50°C ,10%-90% non-condensing
Storage temperature/humidity: -20°C -70°C , 5%-95% non-condensing
Certification: CE, FCC, ROHS
Specifications
PART No. | RBG-F4808M3-AC |
Interface | 48× 100/1000Base-x SFP ports, 8×10GE/1G SFP+ ports |
Console | 1× RJ45 (serial RS-232 DB9 cable included) |
Backplane | 256 Gbps |
Forwarding Rate | 192 Mpps |
Total output BTU (1000BTU/H=293W) | 1347.44 |
Fan Number | 2 |
Noise@25°C(dBA) | 45 |
MTBF (h) | > 60,000 |
Forwarding Mode | Store-and-Forward |
Flash (MB) | 16 |
DRAM (MB) | 256 |
MAC Address Table Size | 32K |
Buffer Size (MB) | 4 |
Jumbo Frame Size | 9K |
Total SVI | 10 |
Power Supply | AC:100V-240V,50/60Hz ±10% 100W, removable |
Power Consumption | |
Full load | < 60W |
Chassis | |
Dimensions (WxDxH) (mm) | 442 x 350 x 44 |
Weight (Kg) (unpopulated) | 4.3 |
Additional information on RBG-F4808M3-AC switch: PDF Datasheet
Additional Information
UPC: |
811704017559 |
Interface Type: |
Gigabit Ethernet |
Interface Type: |
10G |
Management: |
web-managed |
Management: |
SNMP |
Management: |
local console |
Management: |
telnet |
Power Type: |
AC 90-240V embedded PSU |
Connectors: |
RJ45 (Ethernet) |
Connectors: |
DB9 |
Connectors: |
SFP slot |
Type: |
Layer 3 |
Features: |
RSTP |
Features: |
MSTP |
Features: |
802.3ad LACP |
Features: |
IGMP snooping |
Features: |
IPv6 |
Features: |
RIP v1 |
Features: |
RIP v2 |
Features: |
OSPF |
Features: |
dual firmware image |
Features: |
802.1q VLAN |
Features: |
802.1p CoS |
Features: |
bandwidth limiting |
Features: |
19" rack mountable |