CTCUnion
IMC-1001CS-E Compact Gigabit Ethernet to SFP slot industrial fiber media converter, extreme temp.
- SKU:
- IMC-1001CS-E
- UPC:
- 811704016163
- Availability:
- Ships same day for orders placed before 3:30PM PST
Description
Product description
IMC-1001CS is an industrial grade, non-managed, Gigabit Ethernet media converter that supports conversion between electrical 10/100/1000Base-T and optical 100/1000Base-X Ethernet. Simple DIP switch settings allow configuring the UTP port for auto-negotiation or for forced 10/100/1000 speed and half/ full duplex as well as for enabling LFPT (Link Fault Pass Through), Ethernet flow control (802.3x) and selecting Switch Mode (store & forward) or Converter Mode (Jumbo frame Pass-through). Housed in rugged DIN rail or wall mountable enclosures, these converters are designed for harsh environments, such as industrial networking and intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications.
Industrial designed converters feature rugged design with metal housings or wall mounting for DIN Rail mounting, highly reliable electrical design to support very high MTBF (mean time between failure), enhanced safety and surge protection, better EMS (Electro Magnetic Susceptibility), as well as expanded operating temperature ranges. The IMC-1000CS media converter is available in two operating temperature ranges, a standard -10° to 60°C model range or an extended -40° to 75°C range.
- DC input power 12/24/48VDC (9.6 ~ 60VDC), redundant
- IP30 rugged metal housing and fanless
- Wide operating temperature -20 ~ 75°C (IMC-1000C-E, IMC-1000CS-E)
- CE, FCC, Railway traffic EN50121-4 certification
- Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
- Store-and-Forward mode and Pass through mode (set by DIP SW)
- Conversion between 10/100/1000Base-T and 100/1000Base-X Fiber cable interface
- Provides a DIP-Switch to set functions
- Supports LFPT (Link Fault Pass Through)
Technical specifications
| Interfaces: | RJ45 10/100/1000Base-TX port and SFP 100/1000Base-X fiber port |
| Operating wavelength: | according to SFP used |
| Operating distance: | according to SFP used |
| Optical connector: | based on SFP module, LC or SC(only for BiDi modules) |
| Front LEDs: | PWR, Fault, Link/Act (fiber), Speed, Link/Act (copper) |
| Power: | two DC 9~58V input power supplies (screw block connector) |
| Temperature: | -10~60°C (Operating); -20~75°C (Extended Range) |
| Humidity: | 5~95% non condensing |
| Consumption: | less than 5W |
| Dimensions(WxDxH): | 70 x 30 x 103mm |
| Weight: | 225g |
| Compliance: | CE, FCC Class A, EMI: EN55022 Class A, Vibration : IEC 60068-2-6 Shock : IEC 60068-2-27, Free Fall : IEC 60068-2-32, UL60950-1, CE, FCC, Railway traffic EN50121-4 certification |
| MTBF: | 325,000 hours |
Additional information on IMC-1001CS-E: 
PDF datasheet, PDF manual.
Note: A large selection of SFP optical modules are available for the IMC-1001CS-E, both Fast Ethernet or Gigabit Ethernet rated. Please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.
Additional Information
Interface Type: |
Fast Ethernet |
Interface Type: |
Gigabit Ethernet |
Management: |
un-managed |
Transceiver Format: |
SFP |
Power Type: |
DC 10~60V embedded PSU |
Connectors: |
RJ45 (Ethernet) |
Connectors: |
SFP slot |
Connectors: |
screw block |
Type: |
Industrial(hardened) |
Features: |
9K Jumbo frame support |
Features: |
LFP Link Fault Pass through |
Features: |
DIN rail mountable |
Related Products
ROBOfiber
SFP-7000-85 1000Base-SX Gigabit SFP transceiver multimode 550m, 850nm
ROBOfiber
SFP-7020-31 1000Base-LX Gigabit SFP transceiver singlemode 20Km 1310nm w/ DDM
ROBOfiber
SFP-7020-WA Gigabit single strand BiDi SFP transceiver 20Km T:1310/R:1550nm, DDM
ROBOfiber
SFP-7020-WB Gigabit single strand BiDi SFP transceiver 20Km T:1550/R:1310nm, DDM
CTCUnion