V35-485-1M RS-485 to V.35 interface converter

(No reviews yet) Write a Review
SKU:
V35-485-1M
UPC:
V35-485-1M
Availability:
Not a common stock item.
MSRP: $229.00
$180.00
— You save $49.00

Description

The V35-485-1 is a DC powered interface converter that allows full conversion between V.35 and RS-485 interfaces. The converter requires an external AC adapter. The converter provides a high degree of electrical isolation between the serial interfaces. It has DCE/DTE selection for V35 port and can operate 2 or 4 wire, full or half duplex on the RS485 port. LEDs report status of both interfaces. One typical application for this converter is extension of an RS-232 interface over longer distances using 2 or 4 wire copper circuits.

Features of V35-485-1 interface converter
Baud Rate: up to 115.2Kbps
RS-485 2 or 4 wire, Half or Full Duplex operation
Electrical isolation: 2500V minimum
DCE/DTE device setting switch
RTS/CTS, DTR/DSR control switch for Half/Full duplex operating mode
Required DC external power

Technical specifications
Data Rate: 1200, 2400. 4800. 9600. 19.2K, 38.4K, 57.6K or 115.2Kbps

Connectors: V35 DB25 female connector and one MB34M (male)ending cable, RS-485 5 screw terminal block
(on special request, MB34F (female) connector can be provided, please contact us for this option)
LEDs: TD/ RD/ External DC power
Power: External 9V DC/300mA power adapter (provided with the converter)
Temperature: 0-50ºC (Operating), 20-70ºC (Storage)
Humidity: 5%-90% non-condensing
Dimensions: 80mm x 140mm x 25mm
Weight: 150g

Additional information on V35-485-1 series: PDF Datasheet; PDF Installation Manual.

View AllClose

Additional Information

UPC:
811704012141
Interface Type:
RS-485
Interface Type:
V.35
Management:
un-managed
Power Type:
separate AC adapter included
Connectors:
MB34
Connectors:
screw block
View AllClose

0 Reviews

View AllClose