IMC-1000S - Gigabit Ethernet to SFP slot industrial fiber media converter, 2.5kV isolation, -10-60 Celsius

(No reviews yet) Write a Review
SKU:
IMC-1000S
UPC:
811704014343
Availability:
Ships same day for orders placed before 3:30PM PST
  • IMC-1000S - Gigabit Ethernet to SFP slot industrial fiber media converter, 2.5kV isolation, -10-60 Celsius
  • IMC-1000S - Gigabit Ethernet to SFP slot industrial fiber media converter, 2.5kV isolation, -10-60 Celsius
MSRP: $330.00
$190.00
— You save $140.00

Description

Product description

IMC-1000S is a Gigabit Ethernet non-managed media converter that supports conversion between electrical 10/100/1000Base-T and optical 100/1000Base-X Ethernet. Simple DIP switch settings allow configuring the UTP port for auto-negotiation or for forced 10/100/1000 speed and half/full duplex as well as for enabling LFPT (Link Fault Pass Through), Ethernet flow control(802.3x) and selecting Switch Mode (store & forward) or Converter Mode (Jumbo frame Pass-through). Housed in rugged DIN rail or wall mountable enclosures, this converter is designed for harsh environments, such as industrial networking and intelligent transportation systems (ITS) and is also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications.

Industrial designed converters feature rugged design with metal housings or wall mounting for DIN Rail mounting, highly reliable electrical design to support very high MTBF (mean time between failure), enhanced safety and surge protection, better EMS (Electro Magnetic Susceptibility), as well as expanded operating temperature ranges. The IMC-1000S media converter is available in two operating temperature ranges, a standard -10° to 60°C model range or an extended -40° to 75°C range.

  • Redundant dual DC input power 12/24/48VDC (9.6 ~ 60VDC)
  • IP30 rugged metal housing
  • Wide operating temperature -20 ~ 75°C (IMC-1000-E, IMC-1000S-E)
  • UL60950-1, CE, FCC, Railway traffic EN50121-4 certification
  • Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
  • Store-and-Forward mode and Pass through mode (set by DIP SW)
  • Conversion between 10/100/1000Base-T and 100/1000Base-X Fiber cable interface
  • Provide a DIP-Switch to set functions

Technical specifications
Interfaces: RJ45 10/100/1000Base-TX port and SFP 100/1000Base-X fiber port
Operating wavelength: according to SFP used
Operating distance: according to SFP used
Optical connector: based on SFP module, LC or SC(only for BiDi modules)
Front LEDs: PWR1, PWR2, Fault, Link/Act (fiber), Speed, Link/Act (copper)
Power: dual DC 9~58V input power supplies (screw block connector)
Temperature: -10~60°C (Operating); -20~75°C (Extended Range)
Humidity: 5~95% non condensing
Consumption: less than 5W
Dimensions(WxDxH): 106 x 38.6 x 142.1mm
Weight: 370g
Compliance: CE, FCC Class A, EMI: EN55022 Class A, Vibration : IEC 60068-2-6
Shock : IEC 60068-2-27, Free Fall : IEC 60068-2-32, UL60950-1, CE, FCC, Railway traffic EN50121-4 certification
MTBF: 300,000 hours


Additional information on IMC-1000S: PDF datasheet, PDF manual.

Note: A large selection of SFP optical modules are available for the IMC-1000S, both Fast Ethernet or Gigabit Ethernet rated. Please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.
View AllClose

Warranty Information

5 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
Gigabit Ethernet
Management:
un-managed
Transceiver Format:
SFP
Power Type:
redundant
Power Type:
DC 10~60V embedded PSU
Connectors:
RJ45 (Ethernet)
Connectors:
SFP slot
Type:
Industrial(hardened)
Features:
9K Jumbo frame support
Features:
LFP Link Fault Pass through
Features:
DIN rail mountable
View AllClose

0 Reviews

View AllClose