IFC-SERIAL-SC030 - RS-232, RS-485, RS-422 over singlemode fiber industrial media converter 30Km 2.5kV isolation, -10 to 60 Celsius temp

(No reviews yet) Write a Review
SKU:
IFC-SERIAL-SC030
UPC:
811704016002
  • IFC-SERIAL-SC030 - RS-232, RS-485, RS-422 over singlemode fiber industrial media converter 30Km 2.5kV isolation, -10 to 60 Celsius temp
  • IFC-SERIAL-SC030 - RS-232, RS-485, RS-422 over singlemode fiber industrial media converter 30Km 2.5kV isolation, -10 to 60 Celsius temp, DIN rail rear view
  • IFC-SERIAL-SC030 - RS-232, RS-485, RS-422 over singlemode fiber industrial media converter 30Km 2.5kV isolation, -10 to 60 Celsius temp, front panel view
  • IFC-SERIAL-SC030 - RS-232, RS-485, RS-422 over singlemode fiber industrial media converter 30Km 2.5kV isolation, -10 to 60 Celsius temp, top panel view with power connector and DIP sw
MSRP: $550.00
$450.00
— You save $100.00

Description

Product description
The IFC-Serial Series are industrial grade fiber media converters that provide a rugged solution to extend asynchronous RS-232, RS-485 or RS-422 serial transmissions over a distance of up to 2km using multimode fiber or up to 60km using single mode fiber. The converter is capable of selecting interface modes for connection to RS-232 (3 or 5 wire), RS-485 (2 or 4 wire, half or full duplex) or RS-422 (4 wire, full duplex). The IFC-Serial Series secures asynchronous serial data transmissions over EMI resistant fiber at speeds up to 1024kbps. IFC-Serial Series media converters feature two alarm relay contacts and two redundant DC power inputs. The IFC-Serial Series reliable industrial design is perfect for keeping your industrial automation applications running smoothly and continuously. The IFC-Serial Series media converters are available in two operating temperature ranges, a standard -10° to 60°C model range or an extended -40° to 75°C range.

Features
Wide temperature -40°C~75°C (IFC-SERIAL-E) or -10°C~60°C (IFC-SERIAL)
Extend serial transmission distance up to 2km, 30km, 60km
Redundant dual power inputs (12~48VDC)
Supports half-duplex ring application
Supports RS-232, RS-422, RS-485(2/4 wire) transmission to fiber connections.
Enhanced serial baudrate up to 1024kpbs
2.5KV isolation for serial signal
Supports relay output for power or link failure warning
Hardened housing with IP30 protection
Fan-less and DIN-Rail design for harsh industrial environment
Adjustable pull high/low resistor and terminator for RS-422/485 transmission

Technical specifications

Interfaces: 6 pin screw block connector for RS-485/RS-232/RS-422 serial asynchronous port and SC 155M fiber port
Operating wavelength: 1310nm 
Operating distance: up to 30Km on 9/125um
Optical connector: SC (ST available on request)
Front LEDs: PWR1, PWR2, Alarm, Master, TD, RD, Fiber Link, Ring
Power: dual DC 9~58V input power supplies (screw block connector)
Temperature: -10~60°C (Operating); -40~75°C (Extended Range)
Humidity: 5~95% non condensing
Consumption: less than 5W
Dimensions(WxDxH): 106 x 38.6 x 142.1mm
Weight: 370g
Compliance: CE, FCC Class A, EMI: EN55022 Class A, Vibration : IEC 60068-2-6
Shock : IEC 60068-2-27, Free Fall : IEC 60068-2-32
MTBF: 300,000 hours



Fiber power budget according to available models

Model Distance Lambda Min. Output (dBm) Sensitivity (dBm) Power Budget (dB)
IFC-SERIAL-SC002 2Km 1310nm -20 -31 11
IFC-SERIAL-SC030 30Km 1310nm -20 -35 14
IFC-SERIAL-SC060 60Km 1550nm -15 -35 20



Additional information on IFC-SERIAL series: PDFPDF datasheet.

Note: For other serial over fiber converters, please contact our sales department by e-mail or call us.

View AllClose

Warranty Information

5 years
View AllClose

Additional Information

Interface Type:
RS-232
Interface Type:
RS-485
Fiber Type:
single-mode
Management:
un-managed
Wavelength:
1310nm
Tx Distance:
30Km
Power Type:
redundant
Power Type:
DC 10~60V embedded PSU
Connectors:
SC
Connectors:
DB9
Connectors:
screw block
Cable Type:
duplex
Cable Type:
9/125um single-mode
Type:
Industrial(hardened)
Features:
DIN rail mountable
View AllClose

0 Reviews

View AllClose