CTCUnion
IEXT224-4PH VDSL2 LAN Extender pair with remote powered unit and 30W PoE delivered over phone line or coaxial cable
- SKU:
- IEXT224-4PH
- UPC:
- 811704015944
- Availability:
- Price is per SET (local and remote units).
Description
Product description
IEXT224-4PH is a high performance LAN extender that utilizes a single pair of copper telephone wire or a simple coaxial cable and features remote power feeding ability with 4-port PoE switch (30W maximum all ports when remotely powered). If remote power is available, then the remote unit can provide 120W total PoE power (30W 802.3af/at on each Ethernet PoE port).
The IEXT224-4PH solves two problems in LAN extension applications: it overcomes the Ethernet 100 meters (330ft) TP cable limitation and installs a remote device without any extra power required. Several applications can instantly benefit from the application of IEXT224-4PH: IP surveillance with remote PoE IP cameras, VoIP networks with remote PoE IP phones or WiFi MDU/MHU networks with wired backbone. IEXT224-4PH is able to extend Ethernet to 1200 meters (3960ft) on a single copper pair or over an existing coaxial CATV cable and remotely power the 4-port PoE PSE switch. Data transmission, at 1200 meters, still has a respectable 28M/6.5Mbps DL/UP rate. The remote PoE power provided decreases with distance, so please consult the reach tables in the datasheet below to assess the power available at different distances. IEXT224-4PH is perfect when power is either unavailable or cost prohibitive at remote locations.
- High Power deliver up to 30W and up to 1.2KM phone line (AWG24)
- Support remote side Ethernet Port1~4 IEEE802,3at (30W for total PoE Power budget or 120W total PoE if power is present at remote site)
- Power and data extend the distance up to 1.2KM by existing twisted pair phone line (24AWG), power available decreases as reach is further, please check the tables available on datasheet
- Long Distance Speed up to 6.5M/28M (UL /DL ) @1.2KM using VDSL or Coaxial cable
- Wide transmission bandwidth data transmission simultaneous with power transport
- Surge Protection, Reverse polarity protection, Short circuit protection, IP30 Protection case
- DIN rail and Wall mounting, quick power and data rate reading with LED display
- Extreme hardening with operating temperature -40 to 75°C
- DIP settings for remote unit operating from line power or local power
Additional information on IEXT224-4PH VDSL2 and Coaxial Ethernet Extender remote powered PoE set: PDF Datasheet;
PDF User Manual,
PDF PoE brief
Additional Information
UPC: |
811704013469 |
Interface Type: |
Fast Ethernet |
Interface Type: |
POTS line |
Management: |
un-managed |
Tx Distance: |
up to 1.2Km |
Power Type: |
PoE 802.3af powered |
Power Type: |
redundant |
Power Type: |
DC48V input embedded PSU |
Connectors: |
RJ45 (Ethernet) |
Connectors: |
RJ11 |
Connectors: |
BNC |
Connectors: |
screw block |
Cable Type: |
Coaxial RG6/RG59 (CATV) |
PoE Output: |
15.4 Watts/port |
Type: |
Industrial(hardened) |
Features: |
DIN rail mountable |