FRM220-10G-SS - 10G rate SFP+ to SFP+ slot media converter (transponder) w/ web based management support

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
  • FRM220-10G-SS - 10G rate SFP+ to SFP+ slot media converter (transponder) w/ web based management support
  • FRM220-10G-SS - 10G rate SFP+ to SFP+ slot media converter (transponder) w/ web based management support
MSRP: $1,950.00
— You save $952.00


Note: The FRM220-10G-SS converter INCLUDES a 2 slot FRM220-CH02M-AC casing. The case does include a local serial RS-232 DB9 console port for standalone management and AC 90-240V embedded power supply.

Product description

The FRM220-10G-SS transponder card is an extremely versatile all-optical fiber media converter equipped with two 10G rate SFP+ slots. Any 10GBase transceiver (multi-mode or single-mode) or DWDM/CWDM SFP+ module can be installed in each of the SFP+ slots of FRM220-10G-SS transponder card. Also copper direct attach cables (DAC's) are supported by the FRM220-10G-SS transponder. Unit supports web-based, in-band management telnet, SNMP or console management when installed in the FRM220-CH20 chassis or in the small standalone casing of FRM220-CH02M that provides a separate console port. The transponder card supports multi-protocol 10G data rates including 10G Ethernet, STM-64, SONET OC192 or 10G Fibre Channel.

The FRM220-10G-SS all-optical 10G converter is extremely versatile. You can have the transponder installed in the small FRM220-CH02M casing with choice of AC, DC(-48V) or AC+DC power supply or on the 8 or 20 slot FRM220 chassis with 2U and 19" rack mountable size, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-10G-SS 10G rate media converter is one of the best choices for data carriers and service providers.

Technical specifications
Interfaces: Two SFP+ slots supporting 10G Ethernet, OC-192, STM-64, 10G FC (10.51875G), OTN G.709 or OTU2 (10.709225G) data rates
Connectors: SFP+ slots with LC optical connectors, supporting SR, LR, ER, ZR, CWDM or DWDM optics as well as DAC copper and optical cables
Front LEDs: PWR,Line Link, Client Link, Test, Loopback, Alarm,  Active port
Power: Internal 90-260V AC power supply with NEMA1-15(2 blades only), US type main plug or DC -48V with IEC 3 screw block connector 
Temperature: 0~50°C (Operating); 0~70°C (Storage)
Humidity: 10~90% non-condensing
Consumption: less than 10W
Dimensions(WxDxH): 155mm x 88mm x 23mm without power casing
Weight: 150g (card only)
Compliance: CE, FCC, LVD, RoHS
MTBF: 65,000 hours

Additional information on FRM220-10G-SS converter: PDF Datasheet; PDF Installation Manual.

To populate the 10G transponder card with optical modules, please visit the XFP and SFP+ transceiver module page. For DAC cables please visit the 10G Direct Attach Cable page. For any questions please do not hesitate to contact our sales department by e-mail or telephone.

View AllClose

Additional Information

Interface Type:
local console
Transceiver Format:
Power Type:
AC 90-240V embedded PSU
SFP slot
View AllClose

0 Reviews

View AllClose