FRM220-1000MS-SM120 Gigabit Ethernet to 1000Base-ZX singlemode fiber media converter, 1550nm LC 120Km, managed

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
MSRP: $579.00
— You save $330.00


Note: This Gigabit media converter is a bundle between FRM220-1000MS converter and an SFP-7120-55 SFP transceiver module.

Product description

The FRM220-1000MS-SM120 is an extremely versatile Gigabit Ethernet fiber media converter for 10/100/1000Base-T copper to Gigabit 1000Base-ZX single-mode 120Km, 1550nm SFP optical interface. The FRM220-1000MS has its own IP address for direct web management. Unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. These features are available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-1000MS-SM120 has a single-mode 1000Base-ZX miniGBIC (SFP) optical module installed. The Gigabit copper interface has auto-negotiation and speed selection from 10 to 1000 Mbps.

The FRM220-1000MS-SM120 Gigabit Ethernet converter is extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-1000MS-SM10 Gigabit Ethernet media converter is one of the best choices of media converters for data carriers and service providers.

Technical specifications

Interfaces: RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and SFP transceiver for 802.3z 1000Base-ZX
Connectors: RJ-45 copper 10/100/1000 Mbps and dual LC SFP port
UTP port: MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 9K bytes (Jumbo packet support)
Optical slot: dual LC, single-mode, 1550nm, max. range 120Km on 9/125um fiber
Front LEDs: PWR, LLF, Fiber Link, TP Link, Duplex, Speed
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0-50°C (Operating); 0-70°C (Storage)
Humidity: 20-80% non condensing (Operating); 0-90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm
Weight: 340g (without AC adapter)
Compliance: CE, FCC Class A
MTBF: 65,000 hours

Additional information on FRM220-1000MS converter: PDF Datasheet; PDF Installation Manual.

For different choices of SFPs please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Interface Type:
Gigabit Ethernet
Fiber Type:
Transceiver Format:
Tx Distance:
Power Type:
separate AC adapter included
RJ45 (Ethernet)
Cable Type:
Cable Type:
9/125um single-mode
802.3ah OAM
dying gasp
bandwidth limiting
9K Jumbo frame support
LFP Link Fault Pass through
View AllClose

0 Reviews

View AllClose