FRM220-10/100iS Fast Ethernet to 100BaseX SFP slot managed fiber media converter card

(No reviews yet) Write a Review
SKU:
FRM220-10-100IS
UPC:
FRM220-10-100IS
Availability:
Ships same day for orders placed before 3:30PM PST
MSRP: $115.00
$65.00
— You save $50.00

Description

Product description
The FRM220-10-100IS Fast Ethernet fiber media converter is a 10/100Base-TX to 100Base-X open SFP slot converter card. When used with the NMC card unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. Remotely connected converters can be managed in-band over the fiber. Up to 8 big FRM220-CH20 chassis can be controlled with a single management card.

The FRM220 series converters are extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-10-100IS Fast Ethernet media converter is a very powerful choice for media converter solution for data carriers and service providers.

Technical specifications
Interfaces: One RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX and one 100Base-X SFP slot fiber port for 802.3u standard
Connectors: One RJ-45 copper 10/100 Mbps and one SFP port 100Base-X
UTP port: MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 2046 bytes - switch/ 9K bytes - converter
Optical slot: universal SFP slot 155M (open)
Front LEDs: Power, FEF, FX-Link, TX-SPD, Tx-Duplex, Tx-Link
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0-60°C (Operating); -10-70°C (Storage)
Humidity: 10 90% non condensing
Consumption: less than 4W
Dimensions(WxDxH): 88mm x 155mm x 23mm
Weight: 340g (without AC adapter)
Compliance: CE, FCC Class A, LVD, RoHS
MTBF: 65,000 hours


Additional information on FRM220-10-100IS converters: PDF Datasheet; PDF Installation Manual.

Note:
This converter does NOT come with the SFP. For a selection of suitable Fast Ethernet SFPs, please visit the SFP transceiver page.
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Management:
web-managed
Management:
SNMP
Transceiver Format:
SFP
Power Type:
no AC adapter included
Connectors:
RJ45 (Ethernet)
Connectors:
SFP slot
Features:
802.1q VLAN
Features:
bandwidth limiting
Features:
9K Jumbo frame support
Features:
LFP Link Fault Pass through
View AllClose

0 Reviews

View AllClose