FRM220-10/100iS-2 dual channel Fast Ethernet to SFP fiber media converter, web management support

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
  • FRM220-10/100iS-2 dual channel Fast Ethernet to SFP fiber media converter, web management support
  • FRM220-10/100iS-2 dual channel Fast Ethernet to SFP fiber media converter, web management support
MSRP: $199.00
— You save $74.00


Product description
The FRM220-10-100iS-2 dual channel Fast Ethernet is a powerful fiber media converter with two 10/100Base-TX copper to Fast Ethernet SFP slots on a single card. Any 100Base-FX/BX/ZX or WDM/CWDM SFP transceiver can be installed in the SFP slots of the FRM220-10/100iS-2 converter. VLAN settings can be performed to aggregate traffic into a 4 port Fast Ethernet switch. Unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. These features are available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-10/100iS-2 can accommodate any type of miniGBIC (SFP) optical modules, either multi-mode, singlemode or single strand Bi-Directional type. Unit is offering unparalleled flexibility and easy migration from short-haul to long haul fiber connections by simply changing the optical module interface. The Fast Ethernet copper interfaces have auto-negotiation and speed selection from 10/100 Mbps.

The FRM220-10/100iS-2 dual channel Fast Ethernet converter is extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-10/100iS-2 Fast Ethernet media converter is one of the best choices of media converters for data carriers and service providers.

Technical specifications
Interfaces: Two RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX and two SFP slots for 802.3 100Base-X optical standards
Connectors: 2 x RJ-45 copper 10/100 Mbps and 2 x SFP slot 100Mbps
UTP port: MDI/MDI-X, auto-negotiation, Full/Half Duplex, supports Jumbo Packets 9K in converter mode and 2048bytes packet size in switch mode
Features: Support for QinQ double tagged packets/ bandwidth control (N x 32K or N x 512K granularity)
Front LEDs: FEF, Fiber Link 1, Fiber Link 2, ACT, Link 3, Link 4
Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0 50°C (Operating); 0 70°C (Storage)
Humidity: 20 80% non condensing (Operating); 0 90% (Storage)
Consumption: less than 4W
Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm
Weight: 340g (without AC adapter)
Compliance: CE, FCC Class A
MTBF: 65,000 hours

Additional information on FRM220-10/100iS-2 converter: PDF Datasheet; PDF Installation Manual.

To have a completely equipped Fast Ethernet media converter, you must also order an SFP transceiver module together with the FRM220-10/100iS-2 converter. Please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.
View AllClose

Additional Information

Interface Type:
Fast Ethernet
Transceiver Format:
Power Type:
separate AC adapter included
RJ45 (Ethernet)
SFP slot
802.1q VLAN
bandwidth limiting
9K Jumbo frame support
LFP Link Fault Pass through
View AllClose

0 Reviews

View AllClose