EOC-30M - Ethernet over Coax LAN Extender, managed master unit over a coaxial segment using EoCNA, shares cable with CATV

(No reviews yet) Write a Review
Ships same day for orders placed before 3:30PM PST
  • EOC-30M - Ethernet over Coax LAN Extender, managed master unit over a coaxial segment using EoCNA, shares cable with CATV
  • EOC-30M Ethernet over Coax rear panel view
  • Ethernet over Coaxial cable application diagram
  • EOC Ethernet over Coax application diagram
MSRP: $395.00
— You save $110.00


Product description
Ethernet over Coaxial cable (EoCNA) is a technology allowing up to 200Mbps of bandwidth over classic CATV/CCTV coaxial cable. Media can be shared for up to 64 nodes on a single coaxial segment. There is no interference to CATV signal. 200Mbps bandwidth can be attained in a point to point connection on distances of 1800 feet. We provide managed EOC-30M and EOC-30S equipment for Ethernet over Coax transmissions.
Applications of Ethernet-over-Coax include Internet access in MDU/MHU (Multi Dwellings or Hospitality Units) where an existing CATV network is in place or on short range outdoor CATV coaxial networks. They are also useful in upgrades of CCTV Surveillance systems to IP based Surveillance, where Ethernet data must be sent over an existing coaxial cable network.
Last, but not least, Ethernet over Coax could be a Home Networking solution, bringing Ethernet to each room of a house over the existing coaxial cabling. The EOC-30M is the master managed unit that can control up to 60 EOC-30S clients on same coaxial cable segment.

Product Features

  • Extends LAN connectivity using existing coaxial cable
  • Supports CATV and Ethernet over same coaxial cable HomePNA3.1/HomePNA3.0, compliant with ITU-T G.9954 standard
  • 200Mbps (PHY speed) @ 500 meters (approx. 1800feet)
  • 32Mbps (PHY speed) @ 1.2Km (approx. 4000feet)
  • supports point-to-point and point-to-multipoint (up to 64 nodes) over taps and splitters on a single coaxial copper cable segment
  • asymmetrical communications using the EoCNA standard
  • transparent to TCP/IP protocol
  • auto MDI/MDI-X function on the RJ45 10/100BaseTx copper interface
  • Plug and Play(no configuration required and no management features)
  • simple LED status monitoring

Hardware Technical Specifications

LAN Interface: Two RJ45 copper IEEE 802.3u 10/100Base-TX Fast Ethernet interface
WAN interface: Dual coaxial F type connectors for CATV line and TV set 
Transmission Power: 8 +/- 1dBm,  12~28 Mhz Spectrum
Physical layer speed: up to 200Mbps@500 meters
up to 32Mbps@1.2Km (-176dBm/Hz Noise Floor)
LEDs: PWR, LAN Link/Act, Coax Link/Act
Power: External 90-260V AC switching adapter 5VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature: 0 50°C (Operating); 0 70°C (Storage)
Humidity: 10 90% non condensing
Consumption: 6W
Dimensions(WxDxH): 83mm x 138mm x 28mm
Standard: ITU G.9954, IEEE802.3, IEEE802.3u, IEEE802.3x
Compliance: CE, FCC Class A, RoHS
MTBF: 57,000 hours

Additional information on EOC-30M Ethernet over Coax extender: PDF filePDF Datasheet; PDF filePDF Installation Manual.

View AllClose

Warranty Information

2 years
View AllClose

Additional Information

Interface Type:
Fast Ethernet
local console
Power Type:
separate AC adapter included
RJ45 (Ethernet)
F connector
Cable Type:
Coaxial RG6/RG59 (CATV)
wall mountable
View AllClose

0 Reviews

View AllClose