HET2106-W2A - Managed fiber switch with five 10/100Base-TX ports, BiDi single strand uplink and embedded fiber tray

Product description
HET2106-W2A is a low cost Fiber Switch designed for Fiber-To-The-Home (FTTH) applications. Units provides 100Mbps of full duplex connection for subscribers through its single strand single-mode WDM fiber up-link port. Switch has 5 Fast Ethernet RJ45 10/100Base-TX copper ports for local networking. The unit supports remote provisioning and management. Bandwidth control features allow Service Providers to better manage their network load and QoS Features. 802.1Q VLAN support allow deployment of future triple play services.

Features

• Offers Auto-MDI/MDI-X and 10/100Mbps auto-sensing support.
• Supports IGMP snooping to quickly deploy IPTV service
• Q-in-Q VLAN stacking support - service providers can transport the encapsulated traffic for different customers without security risk
• DHCP Auto-Provision with Text based Config file to fulfill the deployment requirements and reduce the OPEX of device maintenance for service providers or operators
• Popular SNMP trap message to rapidly identify network fault due to power outage and reduce truck rollls to save OPEX for service providers
• Built-in Cable Tray - keep excessive fiber inside the box. Save extra cost of buying a separate cable tray as well as saving installation space

Target Applications

SOHO & Residential CPE switch which requires simple network management for FTTX service deployment

Important: The HET2106-W2A Fiber Switch is designed for Service Providers, CLECs or MSOs that intend to get advantage of fiber and provide high quality Triple Play services for their subscribers. Pricing for such customers is special and customization is available and can be discussed on a case by case approach. Please do not hesitate to contact us with inquiries about this FTTH Fiber Switch.

Technical Specifications

Fiber interface runs 100Mbps Tx:1310/Rx:1550nm upstream/downstream

5 port Ethernet switch with 10/100 ports and Auto MDI/MDI-X cable detection

Based VLAN, Tagged VLAN, Q-in-Q VLAN, VLANs: Support to 16 VLAN Groups

Bandwidth control ingress/egress: 256k | 512k | 2M | 5M | 10M | 100Mbps

Firewall features: NAT with VPN pass-through, DMZ, 4K NAT sessions

IGMP Snooping V1/V2, IGMP Throttling

DHCP Client/ DHCP Auto-provisioning/ Text based config

telnet, CLI, SNMP management, power down trap

TFTP firmware upgrade

Hardware Technical Specifications

LAN Interfaces:	Five RJ45 copper IEEE 802.3u 10/100Base-TX
WAN interface:	Single-mode single strand WDM transceiver Tx:1310nm/Rx:1550nm
Back LEDs:	PWR, WAN, LAN1~, Status
Power:	External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0 — 50°C (Operating); 0 — 70°C (Storage)
Humidity:	20 — 80% non condensing (Operating); 0 — 90% (Storage)
Consumption:	4.1W
Dimensions(WxDxH):	160mm x 110mm x 36mm
Management:	telnet, CLI, SNMP
Compliance:	CE, FCC Class A
MTBF:	55,000 hours

Additional information on HET2106-W2A Fiber Switch: PDF Datasheet; PDF Management Manual.

Note: There are several versions of the HET2106 switch without the BiDi fiber up-link port, but instead a simple 10/100Base-TX port or various other optical ports. For more details, please carefully study the datasheet of HET2106 to see all available models. For such models, please contact us for pricing and availability.