GW522FW - Fiber Gateway w/ 2 telephone FXS ports, WiFi Router and combo copper/SFP up-link for active xTTH applications

Product description
GW522FW is a Fiber Gateway designed for Fiber-To-The-Home (FTTH) applications. The Fiber Gateway provides 100Mbps of full duplex connection for subscribers through its combo copper/SFP up-link port. The gateway offers 4 Fast Ethernet ports, an integrated VoIP gateway with 2 FXS RJ11 telephone ports running SIP protocol and a router with WiFi Access Point for the local networking. The unit provides very useful mass deployment features like TR-069 support and remote provisioning and management. SIP protocol makes telephony service accessible, being now most used protocol for VoIP based telephony services. There is also an USB port available on the gateway

Important: The GW522FW Fiber Gateway is designed for Service Providers, CLECs or MSOs that intend to get advantage of fiber and provide high quality Triple Play services for their subscribers. An optional lifeline fallback port is available for out of service occurrences. Pricing for such customers is special and customization is available and can be discussed on a case by case approach. Please do not hesitate to contact us with inquiries about this FTTH Fiber Gateway.

Product Features

Combo copper / SFP slot interface runs 100Mbps upstream/downstream on up-link port

4 port Ethernet switch with 10/100 ports and Auto MDI/MDI-X cable detection

WiFi IEEE802.11b/g/n 2T2R compatible Access Point with various encryption keys available

two RJ11 FXS telephone ports (VoIP based)

supports G.711, G.723, G.726, G.729AB, ILBC and BV16 voice CODECs, and T.38 fax standard

supports G.168 echo cancellation, Comfort Noise Generation, Voice Activity Detection and Caller ID

DTMF tone detection and generation and fax and dial-up modem pass-through support

support SIP signaling protocol providing valuable features for telephone lines like: Caller ID, call forwarding, call waiting, call transfer, call busy, call return, CLIP/CLIR and 3 way conference

router supports PPP, RIP routing, NAT service and DHCP server/client/relay mode

web based management

remote firmware upgrade

support TR-069 and TR-104

USB2.0 host interface

Hardware Technical Specifications

LAN Interfaces:	Four RJ45 copper IEEE 802.3u 10/100Base-T, integrated 802.11g WLAN Access Point
WAN interface:	combo FE copper/SFP open slot for 155Mbps transceivers
Analogue phone interface:	2 FXS RJ11 telephone ports
Front LEDs:	PWR, WAN, WLAN, LAN1~4, TEL1, TEL2
Back LEDs:	each Ethernet port has link/act LEDs
Power:	External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0 50ðC (Operating); 0 70ðC (Storage)
Humidity:	20 80% non condensing (Operating); 0 90% (Storage)
Consumption:	less than 4W
Dimensions(WxDxH):	155mm x 226mm x 29mm
Management:	web based, hidden local console for maintenance
Compliance:	CE, FCC Class A
MTBF:	57,000 hours

Additional information on GW522FW Fiber Gateway: PDF Datasheet; PDF Installation Manual.

Note: There is an optional lifeline version of the GW522FW gateway providing an extra connection to a telephone landline that will be used in case of service failure. For such model, please contact us for pricing and availability.