Search
Browse Categories
 

FRM220-OPS51 - Optical 1:1 protection card for CWDM/DWDM systems, LC/UPC connectors, managed

<< Previous Next >>
MSRP: $2,399.00
Price: $1,350.00
In stock. 4 units available for immediate delivery.
Manufacturer: CTCUnion
Manufacturer Part No: FRM220-OPS51
Fiber Type: single-mode
Connectors: LC
value placeholder
FRM220-OPS51
Note:  Price is per unit, although photo depicts two Optical Protection units. FRM220-CH01M-AC casing is included, allowing the protection card to be managed/configured through local RS-232 console, without the FRM220-NMC management card.


Product description

 The FRM220-OPS51 Optical Line Protection (OLP) unit is able to provide fiber path redundancy on a channel by channel basis. These units are particularly well suited for protection in any type of fiber data transmission, being independent from the optical protocol. The Protection card will work with any DWDM/CWDM system or regular 1310/1550nm grey fiber, covering SONET. SDH, Ethernet, Fibre Channel or any other optical protocols.

This solution includes monitoring capabilities for both the working and protected path fibers. In case of a fiber cut in the active path, traffic will be switched over to the protected path in less than 50 ms. Monitoring is available through SNMP Management when FRM220-OPS51 card is placed in FRM220 rack with SNMP management. The management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port, and configure receive threshold levels for path switching.

Features
  • 1:1 full optical protection (least insertion loss solution)
  • Low channel cross talk < -55dB
  • Low insertion loss < 2.5dB
  • Latch feature, if power is lost the switch remains in its current state
  • Protection transition < 50 ms
  • Works with any combination of 1 ~16 wavelengths
  • Traffic is switched in one of three modes : revertive,non-revertive, manual
  • Programmable Rx threshold setting for switch-over
  • Optical Interface Type : LC connectors
  • Working and protected lines are physically separated fiber

Additional information on FRM220-OPS51 OLPS unit: PDF Datasheet

Related Products

FRM220-CH20 chassis
FRM220-CH20 - 20 slot fiber chassis with dual power and network management options, rack 19"
MSRP: $299.00
Price: $269.00
FRM220-CH20 - 20 slot fiber chassis with dual power and network management options, rack 19"
The FRM220 chassis is a 20 slot fiber media converter chassis with in-band management and 802.3ah support. Any FRM220 series media converter can be installed in the chassis and managed through the FRM220-NMC network management card.
free shipping
FRM220-CH08
FRM220-CH08 - 8 slot fiber chassis with dual power and network management options, rack 19", 1U
MSRP: $299.00
Price: $239.00
FRM220-CH08 - 8 slot fiber chassis with dual power and network management options, rack 19", 1U
The FRM220-CH08 chassis is an 8 slot fiber media converter chassis with in-band management and 802.3ah support. Any FRM220 series media converter can be installed in the chassis and managed through the FRM220-NMC network management card.
free shipping
FRM220-CH01M-AC single slot casing with console and embedded AC PS
FRM220-CH01M-AC - single slot fiber chassis with embedded AC power 90-240V and DB9 RS-232 console port
MSRP: $79.00
Price: $49.00
FRM220-CH01M-AC - single slot fiber chassis with embedded AC power 90-240V and DB9 RS-232 console port
The FRM220-CH01M-AC chassis is a single slot fiber media converter chassis with embedded AC 90-240V power supply and RS-232 DB9 console. Any FRM220 series media converter can be installed in this optional casing. Standard 3 pin IEC power cord is included.
free shipping
FRM220-MD80
FRM220-MD80-UP01 - 8 channels CWDM mux/demux unit w/ management and expansion port
MSRP: $2,399.00
Price: $1,790.00
FRM220-MD80-UP01 - 8 channels CWDM mux/demux unit w/ management and expansion port
The new FRM220 CWDM mux/demux can support the 8 traditional CWDM channels 1471~1611nm but also offers additional channels through the UP01 port. Mux can be managed when used in the large FRM220 chassis or used standalone with smaller casings.

Product Reviews

(0 Ratings, 0 Reviews)