Download 2011 Edge-Core Catalog (20.7Mb)
|
Home > Copper Ethernet Converters
Copper Ethernet Converters
Ethernet over last mile copper converters allow transmission of Ethernet data over several copper based networks. Telephone lines support DSL type technology, extending Ethernet over existing phone-line network. Technologies include symmetrical G.shdsl.bis, G.shdsl and VDSL2 and asymmetrical ADSL2+ standards. Coaxial CATV cables are being used with EoCNA technology delivering throughput close to the wire speed Ethernet over CATV/CCTV networks. A number of different converters allow various data interfaces to connect to the IP network, granting access to a wide variety of equipment to the largest data network in the world, the Internet. Applications include data automation and data collection, remote control and signaling an even surveillance applications that can be run over the Internet. RS232, V35 and E1/T1 interfaces are most used in such applications.
DSL technologies have been developed to provide broadband data access over last mile copper wire circuits. We provide a professional range of symmetrical G.shdsl.bis, G.shdsl and VDSL2 Ethernet over copper extenders.
|
Ethernet over Coaxial cable (EoCNA) is a technology allowing more than 100Mbps of bandwidth over classic CATV/CCTV coaxial cable. Media can be shared for up to 32 nodes on a single coaxial segment. There is no interference to CATV signal.
|
Serial terminal servers and Ethernet bridges are available in this section.
RS-232 and RS-485 as well as synchronous V.35, X.21, RS-530 can be converted to the Ethernet interface, for flexible networking.
|
MSRP: $600.00
Price: $400.00
The TTU01 access unit has a modular slot that accommodates Ethernet or Serial data ports to connect to fractional T1 (DS1) interfaces. TTU01-AC is available with AC (100-240V) power supply. Most common data ports are V.35 and X.21.
|
MSRP: $225.00
Price: $165.00
The EOC-10 is a point-to-point and point-to-multipoint EoCNA (Ethernet over Coax Network Alliance) solution that efficiently extends 10/100
Ethernet circuits up to 900 meters (~3,000 feet) at full Fast Ethernet speed using existing coaxial cable.
|
MSRP: $180.00
Price: $149.00
The VDTU2A is a VDSL2 bridge modem equipped with an RJ45 POTS interface and an RJ45 10/100 Mbps Ethernet port. The VDTU2A is extremely flexible, working in both symmetric and asymmetric connection modes and adjusting for maximum performance over copper.
|
MSRP: $189.00
Price: $159.00
The VDTU2A is a VDSL2 modem equipped with an RJ45 POTS interface and four RJ45 10/100 Mbps Ethernet ports. The VDTU2A is extremely flexible, working in both symmetric and asymmetric connection modes and adjusting for maximum performance over copper.
|
MSRP: $55.00
Price: $39.00
The ATU-R160-1A is an ADSL2/2+ bridge modem equipped with an RJ11 POTS interface and an RJ45 10/100 Mbps Ethernet port and an USB 1.1 interface. Unit is working in both ADSL2 and ADSL2+ standards and adjusting for maximum performance over copper lines.
|
MSRP: $470.00
Price: $380.00
The EFM-10 is a G.shdsl.bis 2-wire 5.7 Mbps Ethernet extender. EFM-10 acts as a bridge with 4 port Ethernet switch. It has full IP management through web interface and SNMP, and also console access and CLI style interface. EFM-10 supports advanced QoS.
|
MSRP: $590.00
Price: $460.00
The EFM-20 is a G.shdsl.bis 4-wire 11.4 Mbps Ethernet extender. EFM-20 acts as a bridge with 4 port Ethernet switch. It has full IP management through web interface and SNMP, and also console access and CLI style interface. EFM-20 supports advanced QoS.
|
MSRP: $690.00
Price: $580.00
The EFM-40 is a G.shdsl.bis 8-wire 22.8 Mbps Ethernet extender. EFM-40 acts as a bridge with 4 port Ethernet switch. It has full IP management through web interface and SNMP, and also console access and CLI style interface. EFM-40 supports advanced QoS.
|
MSRP: $195.00
Price: $160.00
The STE-10 serial terminal server(access server) allows RS-232 asynchronous devices to connect over Ethernet(10BaseT) using TCP/IP protocol. It's a small powerful device allowing lots of serial only managed devices to be seen and controlled over Internet.
|
MSRP: $195.00
Price: $160.00
The STE-100A-232 serial terminal server(access server) allows RS-232 asynchronous devices to connect over Ethernet(10/100Base-TX) using TCP/IP protocol. This small powerful device allows serial only managed devices to be seen and controlled over Internet.
|
MSRP: $195.00
Price: $160.00
The ET100 Ethernet bridge is a perfect choice to connect CSU/DSU's up to 2Mbps to Ethernet(10/100BaseTX) networks. Replace your costly router card and connect new Ethernet only equipment with the ET100 bridge.
| |
| Please call our toll-free
number: 888-959-DATA
M-F, 9-5, Pacific Time
We're now providing
|
|