FRM220-FXO-FXS-SC002 - POTS (RJ11) over fiber telephone line extender, SC 2Km

Product description
The FRM220-FXO-FXS-SC002 is a POTS (RJ11) port over fiber optic media converter. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using a pair of converters, a telephone line can be extended over a fiber optic circuit, providing full service and features like Caller ID. The converter can be used in service mode, alowing connection of 2 telephone sets in between. FRM220-FXO-FXS-SC002 operates on multimode fiber up to 2Km (1.3mi) distance. The fiber media converter is equipped with dual SC type optical connector.

When the FRM220-FXO-FXS-SC002 POTS over fiber converter is placed in the FRM220 rack with in-band and SNMP management, the converters status, type, version, fiber link status, POTS RJ11 port status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.

The uniqueness of FRM220-FXO-FXS-SC002 is given by the ability to convert from standalone media converter to card for the managed FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, make the FRM220-FXO-FXS-SC002 media converter the perfect choice for media converters by data carriers and service providers.

Technical specifications

POTS Line:	FXO (Impedance:600ohms, REN:0.4), FXS (Feedback Voltage: 48VDC, Ring: 90Vp-p)
Interfaces:	RJ11 port 600Ohms and dual SC 155M fiber port
Operating wavelength:	1310nm multimode
Operating distance:	2Km on 62.5/125um fiber, works also on 50/125um fiber
Optical connector:	SC dual type
Front LEDs:	Power, Fiber Link, Di/Do, Test mode
Power:	External 90-260V AC switching adapter 9VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0 50°C (Operating); 0 70°C (Storage)
Humidity:	20 80% non condensing (Operating); 0 90% (Storage)
Consumption:	less than 5W
Dimensions(WxDxH):	88mm x 155mm x 23mm
Weight:	330g (without AC adapter)
Compliance:	CE, FCC Class A
MTBF:	65,000 hours

Fiber power budget for multimode models

Model	Distance	Lambda	Min. Output (dBm)	Sensitivity (dBm)	Power Budget (dB)
FRM220-FXO/S-SC2F	2Km	1310nm	-20	-31	11

Additional information on FRM220-FXO-FXS-SC002: PDF datasheet; PDF Installation Manual.

Note: Versions of FRM220-FXO-FXS-SC002 with ST or FC optical connectors are available on request. For such converters, please contact our sales department by e-mail or call us.