FRM220-1000EDS dual channel Gigabit Ethernet 10/100/1000BaseTx to SFP fiber media converter w/ web based management support

Product description
The FRM220-1000EDS dual channel Gigabit Ethernet is a powerful fiber media converter with two 10/100/1000Base-T copper to Gigabit SFP slots on a single card. Any 1000Base-SX/LX/LHX/ZX or WDM/CWDM SFP transceiver can be installed in the SFP slots of the FRM220-1000EDS converter. VLAN settings can be performed to aggregate traffic into a 4 port Gigabit switch.Unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. These features are available when unit is inserted into the FRM220 in-band managed fiber chassis. FRM220-1000EDS can accommodate any type of miniGBIC (SFP) optical modules, either multi-mode, singlemode or single strand Bi-Directional type. Unit is offering unparalleled flexibility and easy migration from short-haul to long haul fiber connections by simply changing the optical module interface. The Gigabit copper interface has auto-negotiation and speed selection from 10 to 1000 Mbps.

The FRM220-1000EDS dual channel Gigabit Ethernet converter is extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-1000EDS Giga Ethernet media converter is one of the best choices of media converters for data carriers and service providers.

Technical specifications

Interfaces:	Two RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and two SFP slots for 802.3z 1000Base- SX/LX/ZX standards
Connectors:	2 x RJ-45 copper 10/100/1000 Mbps and 2 x SFP slot 1000Mbps
UTP port:	MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 1536 bytes
Optical slot:	Small Form Pluggable - supports Auto and Forced mode operation
Front LEDs:	FEF, Fiber Link 1, Fiber Link 2, ACT, Link 3, Link 4
Power:	External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0 — 50°C (Operating); 0 — 70°C (Storage)
Humidity:	20 — 80% non condensing (Operating); 0 — 90% (Storage)
Consumption:	less than 4W
Dimensions(WxDxH):	85.6mm x 122.6mm x 20mm
Weight:	340g (without AC adapter)
Compliance:	CE, FCC Class A
MTBF:	65,000 hours

Additional information on FRM220-1000EDS converter: PDF Datasheet; PDF Installation Manual.

Note: To have a complete equipped Gigabit media converter, you must also order an SFP transceiver module together with the FRM220-1000EDS converter. Please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.