FIB1-1000ES-W10B Gigabit Ethernet RJ45 to single strand fiber media converter, 10Km B type

Product description
The FIB1-1000ES-W10B Gigabit Ethernet is a single strand Bi-Directional Tx:1550nm/Rx:1310nm fiber media converter for 10/100/1000Base-T to fiber conversion that provides NMS functions for Link-Loss-Forwarding, Remote-Monitoring-Status, and Loop-Back-Test. These optional features are especially useful when the standalone units are linked to one of our rack type units with SNMP management. FIB1-1000ES-W10B uses WDM technology (Wave Division Multiplexing) and has a Gigabit rate SFP module installed with single LC connector. The Gigabit copper interface has auto-negotiation and speed selection from 10 to 1000 Mbps.
You must always match an A model with a B model when planning to install single-strand Bi-Directional media converters.

The uniqueness of FIB1-1000ES-W10B Gigabit Ethernet series is given by the ability to convert from standalone media converters to cards for FRM301 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FIB1-1000ES-W10B Gigabit Ethernet media converter one of the best choices of media converters for data carriers and service providers.

Technical specifications

Interfaces:	RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and single strand SFP transceiver B type
Connectors:	RJ-45 copper 10/100/1000 Mbps and single LC optical connector
UTP port:	MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 1536 bytes
Optical port:	single LC connector, Bi-Di Tx:1550nm/Rx:1310nm, 10Km
Front LEDs:	PWR, LLF, Fiber Link, TP Link, Duplex, Speed
Power:	External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug
Temperature:	0 — 50°C (Operating); 0 — 70°C (Storage)
Humidity:	20 — 80% non condensing (Operating); 0 — 90% (Storage)
Consumption:	less than 4W
Dimensions(WxDxH):	85.6mm x 122.6mm x 20mm
Weight:	340g (without AC adapter)
Compliance:	CE, FCC Class A
MTBF:	65,000 hours

Additional information on FIB1-1000ES converter: PDF Datasheet; PDF Installation Manual.
PDF Datasheet for SFP transceivers

Note: This Gigabit media converter is a bundle between FIB1-1000ES converter and an SFS-7010-WB SFP transceiver module. If you wish to have a different optical module, please contact our sales department by e-mail or telephone.