BLN-4010 - E1 passive impedance adapter 75 ohm BNC female to 120ohm twisted pair IDC

<< Previous in E1 baluns

Next in E1 baluns >>

MSRP: $9.00

Price: $8.00

In stock.

Item Number: BLN-4010

Manufacturer: CTCUnion

Manufacturer Part No: BLN-4010

Quantity:

Add to a new shopping list

Email this page to a friend

The BLN-4010 device allows conversion of E1 signal from balanced to unbalanced and back. BNC 75ohm interface is passively converted to 120 balanced twisted pair copper. BLN-4010 converts only one single BNC. For a complete E1 conversion two BLN-4010 units are required.

Features of BLN-4010
Conversion between BNC female 75ohm and RJ48c twisted pair 120ohm
Low cost and compact and light design
No power required

Technical specifications
Connectors: one BNC female and one Krone IDC pin connector
IDC pin assignment: PA(-), PB(+), PG(G)

Additional information on BLN-4010:

PDF Datasheet;

PDF Specs and schematics.

Related Products

Balun-B1S - E1 passive impedance adapter 75 ohm BNC female to 120ohm twisted pair

MSRP: $9.00

Price: $8.00

Quantity:

The Balun-B1S device allows conversion of E1 signal from balanced to unbalanced and back. BNC 75ohm interface is passively converted to 120 balanced twisted pair copper. Balun-B1S converts only one single BNC.

Balun-B2S - E1 passive impedance adapter 75 ohm BNC female to 120ohm twisted pair

MSRP: $13.00

Price: $11.00

Quantity:

The Balun-B2S device allows conversion of E1 signal from balanced to unbalanced and back. Dual female BNC 75ohm interface is passively converted to 120 balanced two twisted pair copper.

Balun-PS - E1 passive impedance adapter 75 ohm dual BNC male pigtails to 120ohm twisted pair

MSRP: $15.00

Price: $13.00

Quantity:

The Balun-PS device allows conversion of E1 signal from balanced to unbalanced and back. Dual male BNC 75ohm interface is passively converted to 120 balanced two twisted pair copper.

BLN-3010 - E1 passive impedance adapter 75 ohm 1.6/5.6 jack female to 120ohm twisted pair IDC

MSRP: $10.00

Price: $9.00

Quantity:

The BLN-3010 device allows conversion of E1 signal from balanced to unbalanced and back. 1.6/5.6 jack 75ohm interface is passively converted to 120 balanced twisted pair copper. BLN-3010 converts only one single jack.

BTM10 E1/T1 Protocol Analyzer, Datacom Analyzer and 2Mbps BERT tester

Price: From $2,100.00 to $4,500.00

BTM10 is state of the art portable protocol analyzer for E1 / T1 and 2Mbps Datacom interfaces and a complete E1 / T1 Bit Error Rate Tester. The handheld device has an internal battery, an LCD screen with backlight and membrane keyboard.

Product Reviews

(0 Ratings, 0 Reviews)